Read Sharp MX-PNX6 Service Manual online
MX-FN11 DISASSEMBLY AND ASSEMBLY 5 – 43
b. Removing right guide
1) Remove the four screws [1] to remove the right guide [2].
1) Remove the four screws [1] to remove the right guide [2].
c. Removing horizontal registration motor
1) Disconnect the connector [1].
2) Remove the two screws [2], and slide the horizontal registra-
1) Disconnect the connector [1].
2) Remove the two screws [2], and slide the horizontal registra-
tion motor [3] in the arrow direction to remove it.
(3) Punch module
a. Caution for removing punch module
CAUTION: The punch module may be opened during removal.
Open the punch module in advance, if necessary.
b. Removing rear cover
1) Remove the three screws [1] to remove the rear cover [2].
1) Remove the three screws [1] to remove the rear cover [2].
c. Removing right guide
1)
1)
Remove the four screws [1] to remove the right guide [2].
d. Removing the upper cover
1)
1)
Open the front door [1], and remove the three screws [2]. Pull
out the dial [3], and remove the upper cover [4].
out the dial [3], and remove the upper cover [4].
e. Removing punch module
1)
1)
Remove the E-ring [1], washer [2], and the punch spring [3].
[1]
[2]
[1]
[2]
[2] [3]
[1]
[2]
[1]
[2]
[2]
[1]
[4]
[3]
[4]
[2]
[3]
[1]
[2]
Click on the first or last page to see other MX-PNX6 service manuals if exist.