Read Sharp MX-PNX6 Service Manual online
MX-FN11 OPERATIONAL DESCRIPTION 4 – 14
3) When the trailing edge sensor (LED5, PT5) detects the trailing
edge of the sheet, the drive of the punch feed motor (FSIFM) is
stopped, thereby stopping the sheet. Then, the punch motor
(FPNM) is driven to punch holes in the sheet.
stopped, thereby stopping the sheet. Then, the punch motor
(FPNM) is driven to punch holes in the sheet.
4) When the punching operation ends, the punch feed motor
(FSIFM) of the finisher is driven and, at the same time, the hor-
izontal registration motor (FPSM) is rotated in reverse to return
the punch slide unit to its home position.
izontal registration motor (FPSM) is rotated in reverse to return
the punch slide unit to its home position.
5) For each sheet that arrives in succession, the punch slide unit
is returned to its home position, and is caused to repeat steps
1 through 4.
1 through 4.
Punch
Trailing edge sensor
(LED5,PTR5)
Horizontal registration
sensor (LED1-4,PTR1-4)
Punch home position sensor
(FPHPD)
Horizontal registration home
position sensor (FPSHPD)
Horizontal registration motor
(FPSM)
Punch motor (FPNM)
Punch feed motor (FSIFM)
CW rotation
CCW rotation
Click on the first or last page to see other MX-PNX6 service manuals if exist.