Read Sharp MX-PNX6 Service Manual online
MX-FN11 PRODUCT OUTLINE 1 – 1
MX-FN11
Service Manual
[1] PRODUCT OUTLINE
1. Product outline
This machine, a posttreatment device for paper used for copy or fax machines, can be used with the host machine shown below. It features the
offset system that allows feeding of output sheet to the finisher by the paper pass unit (MX-RBX3) and offset delivery of paper for every set of
job.
1) Three types of auto-stapling: Three types of stapling positions are available. (One-point stapling in the front, one-point stapling at the back,
offset system that allows feeding of output sheet to the finisher by the paper pass unit (MX-RBX3) and offset delivery of paper for every set of
job.
1) Three types of auto-stapling: Three types of stapling positions are available. (One-point stapling in the front, one-point stapling at the back,
two-point stapling at the center)
2) Punch system (optional): With the punch module installed, paper can be punched for a binder before delivery (applicable to paper of
weight ranged from 55 to 256 g/m
2
, but inapplicable to OHP film).
Staple cartridges are required for the finisher as a consumable.
(Staple cartridge [Approx. 5000 pcs. x 3 sets] AR-SC2)
(Staple cartridge [Approx. 5000 pcs. x 3 sets] AR-SC2)
Applicable model
MX-4100FN/5000FN
MX-4101FN/5001FN
MX-4101FN/5001FN
MX-FN11
Click on the first or last page to see other MX-PNX6 service manuals if exist.