Read Sharp MX-PNX1A (serv.man7) Service Manual online
MX-FNX1/MX-PNX1 OPERATIONAL DESCRIPTIONS 5 – 5
2. General
This chapter describes operations of the inner finisher. The major operation modes are as follows:
• Non-sort mode
• Offset mode
• Staple mode
• Non-sort mode + punch
• Offset mode + punch
• Staple mode + punch
In this chapter, the basic operations of the non-sort mode, the offset mode, and the staple mode are described.
• Non-sort mode
• Offset mode
• Staple mode
• Non-sort mode + punch
• Offset mode + punch
• Staple mode + punch
In this chapter, the basic operations of the non-sort mode, the offset mode, and the staple mode are described.
3. Outline of the transport path
The outline of the path is shown below.
No.
Name
No.
Name
1
Tray
9
Punch pin
2
Bundle exit roller
10
Paper rear edge sensor (FPPEND)
3
Paddle
11
Main unit paper exit roller
4
Alignment plate
12
Stapler
5
Paper exit roller
13
Paper stopper
6
Take-up belt
14
Empty sensor (FSTPD)
7
Inlet port sensor (FED)
15
Paper holding lever
8
Inlet port roller
1
3
4
5
6
7 8
9
10
11
12
13
14
15
2
Click on the first or last page to see other MX-PNX1A (serv.man7) service manuals if exist.