Read Sharp MX-PEX2 (serv.man2) Service Manual online
7
Accessing the Fiery X3eTY2
2.
Make sure that the Fiery Settings screen reads Idle.
If Printing, Processing, or RIPping appears, the Fiery X3eTY2 is processing a job, and
you must wait until the system finishes and reaches Idle state.
you must wait until the system finishes and reaches Idle state.
3.
Press the menu button to display the Functions menu.
4.
Use the down button to scroll to Shut Down. Use the line selection button to select
Shut Down.
Shut Down.
The Shut Down menu appears with the following options:
• Restart Server: Resets the Fiery X3eTY2 server software without resetting the
underlying operating system.
• Shut Down System: Shuts down the Fiery X3eTY2 properly so that you can safely
power off the Fiery X3eTY2.
• Reboot System: Resets both the Fiery X3eTY2 and the underlying operating system,
and then reboots the Fiery X3eTY2.
5.
Use the line selection button to select Shut Down System.
6.
When a message appears prompting you to check the controller power switch or power
off the controller, press OK.
off the controller, press OK.
7.
Move the power switch on the Fiery X3eTY2 to the Off (O) position (see Figure D).
F
IGURE
D
Fiery X3eTY2 power panel
8.
Power off the MFP using the secondary power switch on the Control Panel, and then the
main power switch inside the front compartment.
main power switch inside the front compartment.
N
OTE
:
If you are recycling power, wait at least five seconds before powering back on.
Service switches
(may be covered)
Power switch
LED display
(may be covered)
Power connector
Click on the first or last page to see other MX-PEX2 (serv.man2) service manuals if exist.