Read Sharp MX-PEX1 (serv.man6) User Guide / Operation Manual online
I
MPOSITION
14
When you use Impose, your downloaded file must be a non-raster file. To remove raster
information from a file with Command WorkStation, right-click the file and select
Remove Raster Data.
information from a file with Command WorkStation, right-click the file and select
Remove Raster Data.
3
The operator selects the job in Command WorkStation,
chooses Impose from the Actions menu, and then applies
the following settings.
chooses Impose from the Actions menu, and then applies
the following settings.
a)
From the Sheet bar, the operator specifies 11
x
17, land-
scape, and duplex.
b)
From the Layout bar, the operator specifies five rows and
five columns, turns on printer’s marks, and then defines
both the offset horizontal and vertical printer’s marks to
0.125 pt.
both the offset horizontal and vertical printer’s marks to
0.125 pt.
c)
From the Finishing bar, the operator specifies gang up
repeat.
d)
From the Scale bar, the operator specifies the scale at
100% and then saves the job.
Utilities
4
The operator selects Card.pdf.dbp in Command WorkStation
and selects Preview.
and selects Preview.
Command WorkStation Help
5
The operator prints the job.
Command WorkStation Help
6
The operator retrieves the job from the MFP.
7
The cards are printed on an 11
x
17 page.
8
The operator follows the printer’s marks and cuts
the business cards.
the business cards.
Step
Task
For more information
Click on the first or last page to see other MX-PEX1 (serv.man6) service manuals if exist.