Read Sharp MX-PEX1 (serv.man3) Service Manual online
67
Error codes and conditions
LED diagnostic codes (continued)
FF
See entries under “Startup”.
Any of the following:
75
93
75
93
One of the following:
• HDD is faulty
• Motherboard is faulty
1. Power off/on the MFP.
2. Reseat the power and data cables to the HDD.
3. Replace the HDD cables.
4. Replace the HDD.
5. Clear the CMOS and power-up settings (see page 81).
6. Replace the motherboard.
00
Indicates that the Fiery X3eTY2 is in normal operational mode. No troubleshooting action is required.
Any other code not
listed in this table
listed in this table
Motherboard is faulty
1. Power off/on the MFP.
2. Clear the CMOS and power-up settings (see page 81).
3. If the problem persists, replace the motherboard.
T
ABLE
B
Fiery X3eTY2 error codes and conditions (Continued)
Symptom
Possible cause
Suggested action
Click on the first or last page to see other MX-PEX1 (serv.man3) service manuals if exist.