MX-PEX1 (serv.man13). Fiery PEX1 Configuration Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 27

The Server Setup menu lets you specify system information that pertains to the Fiery X3eTY2 
and all users. To access the menu, follow the instructions on 

.

When you choose Server Setup, the options appear in sequence, as follows. Default values, 
where applicable, appear in square brackets. Words shown in italics indicate that a product- or 
site-specific value is displayed.

Enter a name for the Fiery X3eTY2 (a maximum of 15 characters). This name appears in the 
Chooser on an AppleTalk network. When you change the Server Name with this option, the 
new name is also applied to the Windows Printing Server Name (

Do not use the device name (

MX-PEX1

) as the server name. Also, if you have more than 

one Fiery X3eTY2, do not assign them the same name. 

Select the appropriate time zone from a list of supported zones.

Verify the correct system date in the standard format for your use. The date appears on the 
Job Log.

Verify the correct system time. Enter the time based on the 24-hour clock in the format 

HH:MM

 (Hours:Minutes). The time appears on the Job Log.

Specify whether the Fiery X3eTY2 should print a start page every time it restarts. The start 
page displays information about the Fiery X3eTY2, including the server name, current date 
and time, amount of memory installed in the Fiery X3eTY2, network protocols enabled, and 
connections published.

Specify whether the MFP touch panel and Command WorkStation should use the 
Macintosh, DOS, or Windows character set for displaying file names. This is important if file 
names include accented or composite characters (such as é or æ).

For mixed-platform networks, choose the option that gives the best overall representation of 
the special characters you use.