Read Sharp MX-PEX1 (serv.man13) User Guide / Operation Manual online
S
ETTING
UP
THE
F
IERY
X3
E
TY2
FROM
THE
MFP
TOUCH
PANEL
25
11 Perform Server Setup, Network Setup, and Printer Setup, in that sequence.
This is the minimum required for initial Setup. Later, you can complete the remaining Setups
from the MFP touch panel or a network computer.
from the MFP touch panel or a network computer.
12 Change the Administrator password to protect your Setup from unauthorized changes.
For information, see
page 66
.
About the MFP touch panel Setup interface
When you perform Setup from the MFP touch panel, you select one menu after another and
enter information about your Fiery X3eTY2 and your network and printing environment.
enter information about your Fiery X3eTY2 and your network and printing environment.
In each Setup screen, the last line of the display panel shows the name of the current Setup
menu.
menu.
When you perform a function from the Fiery X3eTY2 MFP touch panel that prompts you
for the Administrator password, you must enter it promptly. Otherwise, the Fiery X3eTY2
MFP touch panel returns to Idle, and you must start over.
for the Administrator password, you must enter it promptly. Otherwise, the Fiery X3eTY2
MFP touch panel returns to Idle, and you must start over.
Most of the menus are shown on the Control Panel Map, a flowchart that you can print from
the MFP touch panel.
the MFP touch panel.
T
O
PRINT
THE
C
ONTROL
P
ANEL
M
AP
1 Press the System Settings button on the MFP.
2 On the MFP touch panel, press Administrator Password.
3 On the MFP touch panel, use the keyboard to enter the MFP administrator password.
N
OTE
:
This password is not the same as the Fiery X3eTY2.
4 Press OK.
5 At the System Settings screen, scroll with the down button and select Printer Settings.
6 Press Fiery Settings.
7 Scroll with the arrow buttons to Print Pages and press OK.
8 Scroll to Control Panel Map and press OK.
Click on the first or last page to see other MX-PEX1 (serv.man13) service manuals if exist.