Read Sharp MX-PEX1 (serv.man13) User Guide / Operation Manual online
P
REPARING
FOR
F
IERY
X3
E
TY2 S
ETUP
19
Connecting network cable to the Fiery X3eTY2
This section includes an illustration of the Fiery X3eTY2 back panel, and provides
information about connecting the Fiery X3eTY2 to the network.
information about connecting the Fiery X3eTY2 to the network.
Back view of the Fiery X3eTY2
Ethernet connection
For Ethernet connections, the Fiery X3eTY2 supports Unshielded Twisted Pair UTP
(Unshielded Twisted Pair) cabling for these network speeds:
(Unshielded Twisted Pair) cabling for these network speeds:
• 10BaseT: Category 3 or higher
• 100BaseTX: Category 5 or higher (4-pair/8-wire, short-length)
• 1000BaseT: Category 5e or higher (4-pair/8-wire, short-length)
T
O
CONNECT
TO
THE
NETWORK
• Connect the cable from the network to the appropriate network connector (RJ-45) on the
back of the Fiery X3eTY2.
USB connection
If you use a USB cable for USB printing, the cable must be a shielded twisted-pair USB cable
shorter than 10 feet (3 meters). For information about USB printing, see
shorter than 10 feet (3 meters). For information about USB printing, see
page 71
.
1
USB (Type A) connectors
2
Network connector
3
Ethernet cross-over
connector to MFP
connector to MFP
4
MFP connector
2
1
3
4
Click on the first or last page to see other MX-PEX1 (serv.man13) service manuals if exist.