Read Sharp MX-PE10 FIERY (serv.man42) Technical Bulletin online
A
DDENDUM
TO
C
OLOR
P
RINTING
17
A
DDENDUM
TO
C
OLOR
P
RINTING
This chapter describes additions and corrections to Color Printing.
ColorCal calibration
During ColorCal calibration of the Fiery Server, you must perform a scan at the printer touch
panel to measure the calibration page that you have printed.
panel to measure the calibration page that you have printed.
T
O
MEASURE
THE
CALIBRATION
PAGE
1 In Command WorkStation Calibrator, after you print the calibration page, retrieve the
calibration page from the MFP.
2 Follow the instructions on the calibration page to place the page and any required strips on
the glass.
3 On the printer touch panel, press the Fiery button if necessary to display the icons, and then
press the PC Scan icon.
You may have to page left or page right to find the PC Scan icon. If you do not find the PC
Scan icon on the printer touch panel, see the procedure below to add it.
Scan icon on the printer touch panel, see the procedure below to add it.
4 Press Exit after the scan is complete.
5 Return to Command WorkStation to continue and complete the calibration.
T
O
ADD
THE
PC S
CAN
ICON
TO
THE
PRINTER
TOUCH
PANEL
1 Press the arrow below the Job Status button in the upper-right corner of the screen and select
Edit Home.
2 If needed, enter the administrator password.
The default password is admin.
3 Press the plus (+).
4 In the list of functions to add to Home, press PC Scan.
5 Press the arrow below the Job Status button in the upper-right corner of the screen and select
Exit Home Edit Mode.
Click on the first or last page to see other MX-PE10 FIERY (serv.man42) service manuals if exist.