Read Sharp MX-NB12 Service Manual online
MX-NB12 IP ADDRESS SETTING 5 - 2
Available numbers for the IP address
(The default setting for each digit is “000”.)
(The default setting for each digit is “000”.)
3)
Enter a desired address with the numeric keys.
The entered numbers will appear on the display.
The entered numbers will appear on the display.
Note:
• Press the [CLEAR] key (
) to clear the currently entered three
digits.
• You cannot change the IP address if DHCP is set to on.
• When DHCP is set to on, the display shows the IP address
obtained automatically.
• “- - -” appears on the display if the IP address cannot be recog-
nized.
• The [READ-END] key (
) and Audit clear key (
) (ACC.#-C)
cannot be used.
4)
Press the [START] key (
) to fix the entered numbers.
The entered numbers will be fixed and the indicator for the next
three digits lights up.
Repeat steps 2) to 5) to enter the whole address.
three digits lights up.
Repeat steps 2) to 5) to enter the whole address.
Note: If the entered digits are not available, a sound notifies the
error after you press the [START] key (
) and the maximum
available 3-digit number appears on the display.
To change the IP setup, the set values are written in at the
end of the system setup.
To turn the power off, first wait for 3 seconds or so after the
end of the system settings and then turn it off.
If the power is turned on immediately after the end of the sys-
tem settings, the set values may not be written in properly.
The set values become valid as the power is turned on next.
end of the system setup.
To turn the power off, first wait for 3 seconds or so after the
end of the system settings and then turn it off.
If the power is turned on immediately after the end of the sys-
tem settings, the set values may not be written in properly.
The set values become valid as the power is turned on next.
Item
1
(First
digit)
2
(Second
digit)
3
(Third
digit)
4
(Fourth
digit)
IP address
0 - 223
0 - 255
0 - 255
0 - 255
Subnet
Mask
Mask
0 - 255
0 - 255
0 - 255
0 - 255
Default
Gateway
Gateway
0 - 223
0 - 255
0 - 255
0 - 255
When the “200%” indicator is lit
Enter the three digits for 1
in the address.
in the address.
When the “141” indicator is lit
Enter the three digits for 2
in the address.
in the address.
When the “122 (129)” indicator is lit
Enter the three digits for 3
in the address.
in the address.
When the “115 (121)” indicator is lit
Enter the three digits for 4
in the address.
in the address.
1
2
3
4
Click on the first or last page to see other MX-NB12 service manuals if exist.