MX-NB12. Revised Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 6

MX-NB12  SETUP IN A WINDOWS ENVIRONMENT  4 - 2

13) Follow the instructions in the Plug and Play window to install

the driver.
Follow the on-screen instructions.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be  sure to click “Install this driver software any-
way”.

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click “Continue Anyway” or “Yes”.

If you installed Button Manager, set up Button Manager as
explained in the Operation Guide for the machine.

Follow the procedure below to connect the machine to your com-
puter.

A USB cable for connecting the machine to your computer is not
included with the machine. Please purchase the appropriate cable
for your computer.

Caution:

• USB is available with a PC/AT compatible computer that was orig-

inally equipped with USB and had Windows 2000 Professional,
Windows XP Professional, Windows XP Home Edition, Windows
Vista or Windows 7 preinstalled.

• Do not connect the USB cable before installing the MFP driver.

The USB cable should be connected during installation of the
MFP driver.

Note:

• If the machine will be connected using a USB 2.0 port of your

computer, please purchase a USB cable that supports USB 2.0.

• Even when the Microsoft USB 2.0 driver is used, it may not be

possible to obtain full USB 2.0 speed if a PC card supporting
USB 2.0 is used. To obtain the latest driver (which may enable a
higher speed), contact the manufacturer of your PC card.

• Connection is also possible using a USB 1.1 port on your com-

puter. However, the specifications will be USB 1.1 specifications
(Full-Speed).

1)

Insert the cable into the USB connector on the machine.

2)

Insert the other end of the cable into your computer's USB port.

Note:

Interface cables for connecting the machine to your computer are
not included with the machine. Please purchase the appropriate
cable for your computer.

1)

Insert the LAN cable into the LAN connector on the machine.
Use a network cable that is shielded.

2)

Turn on the machine.

3)

Insert the “Software CD-ROM” into your computer's CD-ROM
drive.

4)

Click the “Start” button, click “Computer” and then double-click
the CD-ROM icon (

).

• In Windows XP, click the “Start” button, click “My Computer”,

and then double-click the “CD-ROM” icon.

• In Windows 2000, double-click “My Computer” and then dou-

ble-click the CD-ROM icon.

5)

Double-click the “Setup” icon (

).

• In Windows 7, if a message screen appears asking you for

confirmation, click “Yes”.

• In Windows Vista, if a message screen appears asking you

for confirmation, click “Allow”.

6)

The “SOFTWARE LICENSE” window will appear. Make sure
that you understand the contents of the license agreement, and
then click the “Yes” button.

Note: You can show the “SOFTWARE LICENSE” in a different

language by selecting the desired language from the
language menu.
To install the software in the selected language, continue
the installation with that language selected.

7)

Read the message in the “Welcome” window and then click the
“Next” button.

8)

Click the “Standard” button of the “Connected via the network”
menu.