Read Sharp MX-MF11 Specification online
MX-MF11 MAINTENANCE 2 – 1
MX-MF11
Service Manual
[2] MAINTENANCE
1. Maintenance table
: Check (Clean, replace, or adjust as needed) : Clean
: Replace
: Adjust ✩: Lubricate : Shift position
[Note 1] Replacement reference: Replace according to each paper feed counter value.
MX-MF11: 200K or 1 year Torque limiter: 800K
(NOTE) Paper feed section roller life
Each roller life is as shown on the left. When, therefore, a certain paper feed unit is excessively used, its life may be expired before the mainte-
nance timing.
Actually, however, different sizes of paper are used with different paper feed trays, and it is quite rare that the roller replacement must be made
before the maintenance timing.
If a certain size of paper must be heavily used, set different paper feed trays for that paper size. This information must be explained to the user.
When servicing, check the use frequency of each paper feed tray, and replace the rollers as needed.
When cleaning the roller, it is advisable to use a cloth with a small quantity of water.
The friction level is smaller in the order of the paper pick-up roller, the paper feed roller, and the separation roller.
MX-MF11: 200K or 1 year Torque limiter: 800K
(NOTE) Paper feed section roller life
Each roller life is as shown on the left. When, therefore, a certain paper feed unit is excessively used, its life may be expired before the mainte-
nance timing.
Actually, however, different sizes of paper are used with different paper feed trays, and it is quite rare that the roller replacement must be made
before the maintenance timing.
If a certain size of paper must be heavily used, set different paper feed trays for that paper size. This information must be explained to the user.
When servicing, check the use frequency of each paper feed tray, and replace the rollers as needed.
When cleaning the roller, it is advisable to use a cloth with a small quantity of water.
The friction level is smaller in the order of the paper pick-up roller, the paper feed roller, and the separation roller.
No.
Parts name
Occasionally
When calling
When calling
500K
1000K
1500K
2000K
2500K
3000K
Life judgement
(Reference)
Tool, oil, chemicals
Procedure Treatment after
procedure
1
Transport guide plate
When there is dirt, wipe with dry
cloth.
cloth.
2
Grip roller drive/
follower
follower
When there is dirt, wipe with cloth
and water.
and water.
3
Pick-up roller
[Note 1]
Roller life 200K
Roller life 200K
When there is dirt, wipe with cloth
and water.
and water.
4
Feed roller
[Note 1]
Roller life 200K
Roller life 200K
When there is dirt, wipe with cloth
and water.
and water.
5
Separate roller
[Note 1]
Roller life 200K
Roller life 200K
When there is dirt, wipe with cloth
and water.
and water.
6
Sensor
7
Torque limiter
8
Gear
UKOG-0307FCZZ
Click on the first or last page to see other MX-MF11 service manuals if exist.