Read Sharp MX-M950 / MX-MM1100 (serv.man38) Service Manual online
MX-M1100 SIMULATION 7 – 18
6-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of each fan
motor and the control circuit.
Section
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel key.
2)
Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
6-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the primary
transfer separation.
Section
Process (transfer)
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
When the transfer separation motor operation is completed,
[EXECUTE] key returns to the normal state.
* When [EXECUTE] key is pressed during the load operation,
[EXECUTE] key returns to the normal state.
* When [EXECUTE] key is pressed during the load operation,
the separation operation is continued until it is completed.
After completion of the operation, the load operation is termi-
nated and [EXECUTE] key returns to the normal state.
After completion of the operation, the load operation is termi-
nated and [EXECUTE] key returns to the normal state.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
6-4
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the MC
cleaner.
Section
Process (charging)
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel.
2)
Press [EXECUTE] key.
3)
When the cleaner operation is completed normally, [OK] is dis-
played.
* The counter value is displayed when cleaning reaches R to
played.
* The counter value is displayed when cleaning reaches R to
F.
4)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
7
7-1
Purpose
Setting
Function (Purpose) Used to set the conditions of aging opera-
tion.
Section
Operation/Procedure
1)
1)
Select a target of setting with the touch panel.
2)
Press [EXECUTE] key.
The machine is rebooted in the aging mode.
Afterwards, the operation mode is continued until the power is
turned off or resetting is made.
The machine is rebooted in the aging mode.
Afterwards, the operation mode is continued until the power is
turned off or resetting is made.
3)
When [SYSTEM SETTINGS] key is pressed, the screen
returns to the SUB code entry menu.
returns to the SUB code entry menu.
18
ASRM-F (H)
Duplex reverse roller drive motor (Normal)
(High speed)
(High speed)
19
ASRM-F (L)
Duplex reverse roller drive motor (Normal)
(Low speed)
(Low speed)
20
ASRM-R (H)
Duplex reverse roller drive motor (Reverse)
(High speed)
(High speed)
21
ASRM-R (L)
Duplex reverse roller drive motor (Reverse)
(Low speed)
(Low speed)
22
ADM1-F (H)
ADU transport drive motor (Normal)
(High speed)
(High speed)
23
ADM1-F (L)
ADU transport drive motor (Normal)
(Low speed)
(Low speed)
24
ADM1-R (H)
ADU transport drive motor (Reverse)
(High speed)
(High speed)
25
ADM1-R (L)
ADU transport drive motor (Reverse)
(Low speed)
(Low speed)
26
ADM2-F (H)
ADU transport drive motor 2 (Normal)
(High speed)
(High speed)
27
ADM2-F (L)
ADU transport drive motor 2 (Normal)
(Low speed)
(Low speed)
28
ADM2-R (H)
ADU transport drive motor 2 (Reverse)
(High speed)
(High speed)
29
ADM2-R (L)
ADU transport drive motor 2 (Reverse)
(Low speed)
(Low speed)
30
C1LUM
Cassette 1 lift-up motor
31
C2LUM
Cassette 2 lift-up motor
32
C3LUM
Cassette 3 lift-up motor
33
C4LUM
Cassette 4 lift-up motor
34
C1PFC
Cassette 1 paper transport clutch
35
C2PFC
Cassette 2 paper transport clutch
36
C3PFC
Cassette 3 paper transport clutch
37
C4PFC
Cassette 4 paper transport clutch
38
C1PTC
Horizontal transport clutch
39
VPTC1
Vertical transport clutch control output 1 (lower)
40
VPTC2
Vertical transport clutch control output 2 (mid)
41
VPTC3
Vertical transport clutch control output 3 (upper)
42
LCCPTC
LCC transport clutch
43
POCS
FU/FD select gate solenoid
44
ADUCS
Duplex/FD select gate solenoid
45
FRS
Fusing lower pawl separation solenoid
NO.
Display Item
Content
1
CFMCL
Process cooling fan 1.2.3.4
2
FM-DV
Developer dispersion suction fan
3
CFM-DV
Developing unit cooling fan
4
VFM-EX_H
Main unit exhaust heat fan (Speed High)
5
VFM-EX_L
Main unit exhaust heat fan (Speed Low)
6
VFM-EX12
Ozone exhaust fan 1 / Ozone exhaust fan 2
7
CFM-DC
Power cooling fan 1.2.3
8
CFM-ADU1
Reverse transport cooling fan / Reverse cooling
fan
fan
9
CFM-ADU2
ADU section paper cooling fan 1.2
10
CFM-PA1
Paper exit section paper cooling fan
11
CFM-PO1
Polygon cooling fan
12
CFM_PS/
CFM_Tr
CFM_Tr
PS cooling fan / Process section cooling fan
13
CONFM
Controller cooling fan motor / HDD cooling fan
motor
motor
NO.
Display Item
Content
AGING
Aging operation setting
INTERVAL
Intermittent setting
MISFEED DISABLE
JAM detection YES/NO setting
FUSING DISABLE
Fusing operation YES/NO setting
WARMUP DISABLE
Warm-up omission setting
DV CHECK DISABLE
Developing unit detection YES/NO setting
SHADING DISABLE
Shading omission setting
CCD GAIN FREE
CCD gain adjustment free setting
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man38) service manuals if exist.