Read Sharp MX-M950 / MX-MM1100 (serv.man3) Handy Guide online
- 9 -
Power Requirements
MX-M850
MX-M950/1100
Office or Production Configurations
Production Configurations
Other options
230V, 50 Hz
Power Supply
Single phase
BTUs/Hour
1160
Watts
240
SmartPunch
Electrical
Amps
1.6
1 x 13amp plug is provided
with unit.
with unit.
230V, 50 Hz
Power Supply
Single phase
BTUs/Hour
Watts
200
Plockmatic Bookletmaker
Electrical
Amps
1 x 13amp plug is provided
with basic unit. Covers,
Trimmer and Squarefold
options take power from
main unit.
with basic unit. Covers,
Trimmer and Squarefold
options take power from
main unit.
→
→
→
→
Engine has 2 power cables. Machine is
delivered with 2 x 13amp plugs attached.
→
→
→
→
Paper trays and finishers take power from the
main unit.
→
→
→
→
Engine has a single power cable and is delivered
without a plug
→
→
→
→
Maximum power requirement is 230V 16 amps.
Machine cannot be installed using a standard 3
pin 13 amp mains plug and socket.
pin 13 amp mains plug and socket.
→
→
→
→
Dealer must attach a 16amp plug (as per picture
on the right above); for Direct sales installations the
plug is attached during PDI at TLS
plug is attached during PDI at TLS
→
→
→
→
Customer must provide dedicated power socket
(as per left picture above) wired to a fuse / circuit
breaker rated at 16 Amps with an adequate
electrical supply. This needs to be arranged by
the customer prior to installation.
breaker rated at 16 Amps with an adequate
electrical supply. This needs to be arranged by
the customer prior to installation.
→
→
→
→
Paper trays and Sharp finishing options take power
from main unit. (For 3
rd
party options see below).
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man3) service manuals if exist.