Read Sharp MX-M950 / MX-MM1100 (serv.man22) Service Manual online
MX-M1100 TONER SUPPLY SECTION J – 5
10) Remove the step screw (a) in the rear section of the toner hop-
per unit from the toner tray (b).
* When installing the toner hopper unit, pull out the toner tray
and engage the step screw (a) and the connector (b), and
store the toner hopper unit together with the toner tray.
store the toner hopper unit together with the toner tray.
a. Toner remaining quantity sensor
1)
Remove the toner hopper unit.
2)
Disconnect the connector (a), and remove the screw (b).
Remove the toner remaining quantity sensor (c).
* Use extra care not to foul the connecter (a) terminal section.
Remove the toner remaining quantity sensor (c).
* Use extra care not to foul the connecter (a) terminal section.
b. Toner motor 1 / Toner motor 2
1)
Remove the toner hopper unit.
2)
Disconnect the connector (a), and remove the harness (b)
from the harness holder (c). Remove the screw (d), and
remove the toner motor 1 (e).
from the harness holder (c). Remove the screw (d), and
remove the toner motor 1 (e).
3)
Remove the screw (a). Pull up the sheet (b) and disconnect
the connector (c). Remove the harness (d) from the sheet (e).
the connector (c). Remove the harness (d) from the sheet (e).
4)
Remove the screw (a), and remove the toner motor 2 (b).
a
b
a
b
a
b
b
c
a
d
b
d
c
e
a
b
c
d
e
e
b
a
a
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man22) service manuals if exist.