Read Sharp MX-M950 / MX-MM1100 (serv.man18) Service Manual online
MX-M1100 PAPER TRANSPORT SECTION F – 9
2)
Push the lever (a) on the intermediate frame rear side to
release the lock, and rotate the handle (b) to put it straight.
release the lock, and rotate the handle (b) to put it straight.
3)
Remove the screw (a), and remove the cover (b).
4)
Disconnect the connector (a). Remove the screw (b), and
rotate the plate (c).
* When connecting, arrange so that the connector (a) does
rotate the plate (c).
* When connecting, arrange so that the connector (a) does
not extend over the PS roller unit.
5)
Remove the PS roller unit (a).
a. PS cooling fan
1)
Remove the PS roller unit.
2)
Disconnect the connector (a), and remove the screw (b).
Remove the PS cooling fan (c).
Remove the PS cooling fan (c).
b. High voltage resistor PWB
1)
Remove the PS roller unit.
2)
Remove the screw (a), and remove the earth wire (b). Remove
the screw (c), and remove the high voltage resistor PWB (d).
the screw (c), and remove the high voltage resistor PWB (d).
b
a
a
b
a
a
b
c
a
a
c
b
a
b
d
a
b
c
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man18) service manuals if exist.