Read Sharp MX-M950 / MX-MM1100 (serv.man15) Service Manual online
MX-M1100 DSPF SECTION C – 9
a. DSPF document tray upper limit sensor / DSPF paper pass
sensor1 / DSPF random sensor
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the paper feed unit.
3)
Remove the screw (a), and remove the cover (b).
4)
Disconnect the connector (a), and remove the DSPF docu-
ment tray upper limit sensor (b).
ment tray upper limit sensor (b).
5)
Remove the screw (a), and disconnect the connector (b), and
remove the DSPF paper pass sensor 1 (c) and the DSPF ran-
dom sensor (d).
remove the DSPF paper pass sensor 1 (c) and the DSPF ran-
dom sensor (d).
(3) DSPF document tray lower limit sensor
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the document tray unit.
3)
Remove the paper feed unit.
4)
Remove the screw (a), and remove the double feed detection
unit (b).
* Since the harness is kept connected, be careful not to break
unit (b).
* Since the harness is kept connected, be careful not to break
it.
5)
Remove the E-ring (a), and remove the No.1 resist roller (idle)
(b).
(b).
6)
Remove the screw (a) and the step screw (b), and remove the
paper guide (c).
paper guide (c).
a
b
a
b
a
c
d
b
a
a
b
b
a
c
a
b
a
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man15) service manuals if exist.