Read Sharp MX-M905 (serv.man3) Service Manual online
MX-M905 AR-SU1 (STAMP UNIT) 21 – 2
5)
Install the finisher stamp unit together with the earth wire by
using the screw which was removed in the procedure 4).
using the screw which was removed in the procedure 4).
* Fit the stamp cover boss with the finish stamp hole.
* Pull out the harness to the left side when viewed from the
front. Keep the harness away from the solenoid of the finish
stamp unit.
stamp unit.
6)
Rotate the stamp case unit and lock it. Arrange the harness of
the finish stamp unit, and insert the connector.
the finish stamp unit, and insert the connector.
7)
Hang the hook and attach the cover, and fix it with the screw.
8)
Hold the pawl and slide the stamp case unit.
9)
Insert the finish stamp cartridge in the arrow direction until it
clicks.
clicks.
* Do not insert from the opposite side.
Click on the first or last page to see other MX-M905 (serv.man3) service manuals if exist.