Read Sharp MX-M904 / MX-M1204 (serv.man67) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
[Description]
No.
Item
Details
1
UI
Preview screen is not updated after deleting any page. This problem is corrected.
2
UI
The warning message "Operation is disabled. Please see your administrator for
your assistance." or " This operation is disabled. " was occasionally displayed if IC
card authentication was enabled. This problem has been corrected.
your assistance." or " This operation is disabled. " was occasionally displayed if IC
card authentication was enabled. This problem has been corrected.
3
UI
The modification is made to illuminate the key when pressing the key like software
keyboard etc so that the users can easily recognize they have pressed the button.
keyboard etc so that the users can easily recognize they have pressed the button.
4
UI
When entering the login name/password on login screen of external authentication
application, and then touching the text box of login name right after pressing login
key, the message "Connecting" keeps appearing in some cases. This problem is
corrected.
application, and then touching the text box of login name right after pressing login
key, the message "Connecting" keeps appearing in some cases. This problem is
corrected.
5
UI
When entering texts using the certain OSA application, the characters are
overlapped if the characters are input from the external keyboard. This problem has
been corrected.
overlapped if the characters are input from the external keyboard. This problem has
been corrected.
6
UI
When entering the login name/password on login screen of external authentication
application and then repeatedly pressing [Login] key, the machine occasionally
locks up. This problem is corrected.
application and then repeatedly pressing [Login] key, the machine occasionally
locks up. This problem is corrected.
7
UI
Modification of incorrect German translation in System Settings -> Device Control ->
Registration Adjustment
Registration Adjustment
8
UI
In Print from Network Folder mode, when folder path is entered directly, folder path/
user name/ password were all cleared if the connection to Network folder failed and
the data had to be entered again when retrying. To improve this situation, the
modification has been made to maintain these information until the print from
Network folder is completed.
user name/ password were all cleared if the connection to Network folder failed and
the data had to be entered again when retrying. To improve this situation, the
modification has been made to maintain these information until the print from
Network folder is completed.
9
UI
OSA standard applications are initialized after upgrading to the firmware with
support for Cloud Portal (0300h2). This problem has been corrected.
support for Cloud Portal (0300h2). This problem has been corrected.
10 Image send
Modification of the problem with Fax data reception. The problem occurred due to
the problem with the processing of internal timer control section for ICU.
the problem with the processing of internal timer control section for ICU.
11 Image send
NG16 error occurred while receiving Fax data. Machine is in wait condition and
never output the data. This problem has been corrected.
never output the data. This problem has been corrected.
12 Image send
MFP displays the message “Receiving” for Fax data but never output the data. This
problem has been corrected.
problem has been corrected.
13 Simulation
Modification of a failure which operation panel does not respond by touching after
the setting of aging mode in Sim 7-1 and reboot.
the setting of aging mode in Sim 7-1 and reboot.
14 Printer
It takes too long to output particular PDF file by Direct Print. This problem has been
corrected.
corrected.
15 Printer
Unable to perform Direct Print with particular PDF file. This problem has been
corrected.
corrected.
16 Printer
MFP stops printing before finish displaying "Waiting". This problem has been
corrected.
corrected.
17 Printer
Modification for the problem that the warning icon "waste-receptacle-full" is
displayed when printing with Mac OS 10.8.3 + PPD.
displayed when printing with Mac OS 10.8.3 + PPD.
18 Web Page
The address registered to a Group disappeared when it is done on web page
displayed on main unit panel. This problem has been corrected.
displayed on main unit panel. This problem has been corrected.
19 Main unit Web
Description on “encryption level” has been added to "Security Settings" -> "SSL
Settings" -> "Client Port" on web page. (Except for Russia)
Settings" -> "Client Port" on web page. (Except for Russia)
20 Main unit control
A new Simulation mode has been developed to conform to new standard of "Blue
Angel" (eco-label for Germany). The check box for Auto power shut off mode is not
displayed when this mode is enabled that machine enters Auto power shut off mode
at any time.
Sim26-50 POWER SHUT-OFF SET
While checkbox is not displayed: The machine is under factory default condition for
EUROPE/UK.
Angel" (eco-label for Germany). The check box for Auto power shut off mode is not
displayed when this mode is enabled that machine enters Auto power shut off mode
at any time.
Sim26-50 POWER SHUT-OFF SET
While checkbox is not displayed: The machine is under factory default condition for
EUROPE/UK.
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man67) service manuals if exist.