Read Sharp MX-M904 / MX-M1204 (serv.man67) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
1. Model Name: MX-M904/M1054/M1204
2. Description:
Upgrade of ICUM, PCU-ROM, and E-Manual
From mid-December 2013 production
ROM Control
ICUM
ICU1
ICU2
PCU
SCU
DSPF
E-Manual
D00
0400h200 0300h200 0102S100 0206h200 0100h200 0100h20a 0150h200
* ICUM above is the version described in the ROM management label. Check that the actual
version is: ICUM(MAIN): 04.00.h2.00/ICUM(SUB): 04.00.h2.00/LANGUAGE: 01.43.S1.00/
UICONTENTS: 04.00.h2.00 in SIM22-5.
ICU1 is also the version described in the ROM management label. Check that the actual
version is: ICU1(MAIN): 03.00.h2.00/ICU1(BOOT): 01.01.h2.00/ICU1(SUB): 01.00.h2.0c
in SIM22-5.
version is: ICUM(MAIN): 04.00.h2.00/ICUM(SUB): 04.00.h2.00/LANGUAGE: 01.43.S1.00/
UICONTENTS: 04.00.h2.00 in SIM22-5.
ICU1 is also the version described in the ROM management label. Check that the actual
version is: ICU1(MAIN): 03.00.h2.00/ICU1(BOOT): 01.01.h2.00/ICU1(SUB): 01.00.h2.0c
in SIM22-5.
Item of change: See the attached sheets.
ROM Version Combination History Table
No.
ROM
Control
ICUM
ICU1
ICU2
PCU
SCU
DSPF
E-Manual Action T/R No
(4)
C00 0300h200 0300h200 0102S100 0205h200 0100h200 0100h20a 0140h200
2013/9
Mid
HRE-089
(3)
B03 0201h200 0200h200 0101S100 0204h200 0100h200 0100h20a 0130h200
2013/7
Mid
HRE-086
(2)
B01 0201h200 0200h200 0101S100 0201h200 0100h200 0100h20a 0130h200
2013/1
Mid
HRE-079
(1)
B00 0200h200 0200h200 0101S100 0200h200 0100h200 0100h20a 0130h200
2012/11
Mid
HRE-077
ROM UPGRADE..... (5)
TECHNICAL BULLETIN
Date:
20
th
January 2014
Model:
MX-M904/1054/1204
Ref.:
HRE092
Colour:
White
Page:
1 of 3
Sharp Electronics (UK) Ltd., Technical Services Group
[Description]
No.
Item
Details
1
UI
Preview screen is not updated after deleting any page. This problem is corrected.
2
UI
The warning message "Operation is disabled. Please see your administrator for
your assistance." or " This operation is disabled. " was occasionally displayed if IC
card authentication was enabled. This problem has been corrected.
your assistance." or " This operation is disabled. " was occasionally displayed if IC
card authentication was enabled. This problem has been corrected.
3
UI
The modification is made to illuminate the key when pressing the key like software
keyboard etc so that the users can easily recognize they have pressed the button.
keyboard etc so that the users can easily recognize they have pressed the button.
4
UI
When entering the login name/password on login screen of external authentication
application, and then touching the text box of login name right after pressing login
key, the message "Connecting" keeps appearing in some cases. This problem is
corrected.
application, and then touching the text box of login name right after pressing login
key, the message "Connecting" keeps appearing in some cases. This problem is
corrected.
5
UI
When entering texts using the certain OSA application, the characters are
overlapped if the characters are input from the external keyboard. This problem has
been corrected.
overlapped if the characters are input from the external keyboard. This problem has
been corrected.
6
UI
When entering the login name/password on login screen of external authentication
application and then repeatedly pressing [Login] key, the machine occasionally
locks up. This problem is corrected.
application and then repeatedly pressing [Login] key, the machine occasionally
locks up. This problem is corrected.
7
UI
Modification of incorrect German translation in System Settings -> Device Control ->
Registration Adjustment
Registration Adjustment
8
UI
In Print from Network Folder mode, when folder path is entered directly, folder path/
user name/ password were all cleared if the connection to Network folder failed and
the data had to be entered again when retrying. To improve this situation, the
modification has been made to maintain these information until the print from
Network folder is completed.
user name/ password were all cleared if the connection to Network folder failed and
the data had to be entered again when retrying. To improve this situation, the
modification has been made to maintain these information until the print from
Network folder is completed.
9
UI
OSA standard applications are initialized after upgrading to the firmware with
support for Cloud Portal (0300h2). This problem has been corrected.
support for Cloud Portal (0300h2). This problem has been corrected.
10 Image send
Modification of the problem with Fax data reception. The problem occurred due to
the problem with the processing of internal timer control section for ICU.
the problem with the processing of internal timer control section for ICU.
11 Image send
NG16 error occurred while receiving Fax data. Machine is in wait condition and
never output the data. This problem has been corrected.
never output the data. This problem has been corrected.
12 Image send
MFP displays the message “Receiving” for Fax data but never output the data. This
problem has been corrected.
problem has been corrected.
13 Simulation
Modification of a failure which operation panel does not respond by touching after
the setting of aging mode in Sim 7-1 and reboot.
the setting of aging mode in Sim 7-1 and reboot.
14 Printer
It takes too long to output particular PDF file by Direct Print. This problem has been
corrected.
corrected.
15 Printer
Unable to perform Direct Print with particular PDF file. This problem has been
corrected.
corrected.
16 Printer
MFP stops printing before finish displaying "Waiting". This problem has been
corrected.
corrected.
17 Printer
Modification for the problem that the warning icon "waste-receptacle-full" is
displayed when printing with Mac OS 10.8.3 + PPD.
displayed when printing with Mac OS 10.8.3 + PPD.
18 Web Page
The address registered to a Group disappeared when it is done on web page
displayed on main unit panel. This problem has been corrected.
displayed on main unit panel. This problem has been corrected.
19 Main unit Web
Description on “encryption level” has been added to "Security Settings" -> "SSL
Settings" -> "Client Port" on web page. (Except for Russia)
Settings" -> "Client Port" on web page. (Except for Russia)
20 Main unit control
A new Simulation mode has been developed to conform to new standard of "Blue
Angel" (eco-label for Germany). The check box for Auto power shut off mode is not
displayed when this mode is enabled that machine enters Auto power shut off mode
at any time.
Sim26-50 POWER SHUT-OFF SET
While checkbox is not displayed: The machine is under factory default condition for
EUROPE/UK.
Angel" (eco-label for Germany). The check box for Auto power shut off mode is not
displayed when this mode is enabled that machine enters Auto power shut off mode
at any time.
Sim26-50 POWER SHUT-OFF SET
While checkbox is not displayed: The machine is under factory default condition for
EUROPE/UK.
Sharp Electronics (UK) Ltd., Technical Services Group
While displayed: The machine is under factory default condition for those other
than EUROPE/UK.
than EUROPE/UK.
21 Main unit control
Occasionally, toner quantity jumps to 5%. This problem has been corrected.
22 Main unit control
Modification has been made so that if paper jam occurs while using Plockmatic
Booklet maker, the reprinting starts from page 1 after clearing the jam.
Booklet maker, the reprinting starts from page 1 after clearing the jam.
No.
Item
Details
23 Main unit control
Modification has been implemented to accelerate the time to start printing from a
slave machine during tandem print.
slave machine during tandem print.
24 Main unit control
Downloading of Device Cloning data fails if IE 10 is used. This problem has been
corrected.
corrected.
25 Main unit control
Modification of data output onto Offset tray on MX-ST10 (large size stacker) while
Top tray on MX-ST10 is selected in Printer driver.
The problem occurred under following conditions:
- MX-ST10 is installed but the optional Finisher is not installed.
- Offset tray on MX-ST10 is set as default exit tray in System Settings.
Top tray on MX-ST10 is selected in Printer driver.
The problem occurred under following conditions:
- MX-ST10 is installed but the optional Finisher is not installed.
- Offset tray on MX-ST10 is set as default exit tray in System Settings.
26 Main unit control
Improvement of speed to print custom size papers
27 Main unit control
Modification for the problem that Time of E-Mail is out of sync with the server when
Daylight Saving Time Setting is enabled.
Daylight Saving Time Setting is enabled.
28 Main unit control
Modification of occasional machine lockup after deleting a job. The machine locked
up displaying “Please wait.”
up displaying “Please wait.”
29 Main unit control
Main unit occasionally locked up while performing Print job (“Hold only”) while
displaying thumbnail list in Document Filing. This problem has been corrected.
displaying thumbnail list in Document Filing. This problem has been corrected.
30 Specification
OSA4.5 has been supported.
31 Specification
Support for Sharpdesk Mobile is implemented.