Read Sharp MX-M904 / MX-M1204 (serv.man2) Handy Guide online
SHARP
REPAIR HINTS
77
SPECIFICATION
Model
Symptom
Advice
MX-M1055
MX-M1205
MX-M1205
What is the recommended
resolution/dimension when using
custom images for the HOME Screen?
The maximum image size which can be uploaded to the
Home Screen is 1280 x 800 (640Kb)
ALL
Is it possible to enable/disable the
Advanced Key Operator Adjustments
(for image quality, peripheral
adjustments etc.)
Enter Sim 26-50 and change the MACHINE ADJ setting:-
MX-M904/1054/1204 item F, (0 = disable, 1 = displayed)
MX-M1055/1205 item E, (0 = disable, 1 = displayed)
Then add or remove the HOME Screen Machine
Adjustment icon/shortcut.
Note: For MX-M1055/1205 only, the Advanced Operator
Adjustments is enabled as default.
Is it possible to print onto Banner Paper
up to 1200mm in length?
Banner print is not supported.
How do you print User Account
information when User Control is
enabled?
Select Settings - User Control - Default Settings.
Scroll down and select the required option from User
Information Print menu.
Note: The Administrators password will be required.
Is it possible to Tandem
MX-M904-1205 series with another
MX-M mono device?
Tandem operation is only supported under the following
configurations:-
MX-M904/1054/1204 with MX-M904/1054/1204 or
MX-M1055/1205 with MX-M1055/1205 or
MX-M904/1054/1204 (Master) with
MX-M904/1054/1055/1204/1205 (Slave).
PAPER FEED & TRANSPORT
MX-LC13N
When reviewing jam history or
reviewing jam cause codes, which tray
indication corresponds with which X-
LC13N tray?
For the 1
st
MX-LC13N, the large capacity trays are
identified as Tray1 & Tray2 within the jam cause code
description.
For the 2
nd
MX-LC13N the large capacity trays are
identified as Tray5 & Tray6.
ALL
When reviewing jam cause codes, what
does _L indicate when Tray or MFT jams
are listed (eg. TRAY1_L)?
_L indicates the paper feed counter for the specified
cassette or bypass tray has exceeded 100K (PF rollers are
life expired). Replace the PF & Separation Rollers and
reset the tray counter if constant jams are experienced.
TROUBLE CODES
MX-M904
MX-M1054
MX-M1204
MX-M1204
E7-48 after MX-EB11 installation
To support the MX-M904/1054/1204 series, upgrade the
MX-EB11 (ACRE) firmware to 04.00.A1 (or higher)
L4-51 or L4-55 only after performing a
firmware upgrade
Due to a production change (July’12), earlier models did
not have CFM-Tr, CFM-CL2-4 process cooling fans
installed therefore, the detection may be enabled after
the firmware upgrade is complete.
If CFM-Tr & CFM-CL2-4 process cooling fans are not
present, execute SIM55-01 and change
SSW21-4 from 0 to 1.
U6-54 after installing two MX-LC13s
To support the installation of two MX-LC13, upgrade the
MX-LC13 firmware to v01.05.S1 (or higher)
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man2) service manuals if exist.