Read Sharp MX-M904 / MX-M1204 (serv.man10) Service Manual online
MX-M1204 ADJUSTMENTS 5 – 80
13-A
Image density and gradation adjustment in
the FAX send mode (Collective adjustment
of all the FAX modes)
the FAX send mode (Collective adjustment
of all the FAX modes)
1) Enter the Sim. 46-40 mode, and select the I-FAX or FAX.
2) Press [EXECUTE] button.
2) Press [EXECUTE] button.
The adjustment pattern is printed.
3) Check the print density in the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
perform the following procedure.
4) Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 2 thru 4 until a satisfactory result is
obtained.
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 2 thru 4 until a satisfactory result is
obtained.
13-B
Image density and gradation adjustment in
the FAX send mode (Normal mode)
the FAX send mode (Normal mode)
1) Enter the Sim. 46-41 mode, and select the I-FAX or FAX.
2) Select a mode to be adjusted with the scroll button.
2) Select a mode to be adjusted with the scroll button.
3) Press [EXECUTE] button.
The adjustment pattern is printed.
4) Check the print density of the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
perform the following procedure.
5) Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
To select the exposure mode actually used in the FAX send
mode, select item G and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
To select the exposure mode actually used in the FAX send
mode, select item G and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button.
13-C
Image density and gradation adjustment in
the FAX send mode (Fine mode)
the FAX send mode (Fine mode)
1)
Enter the Sim. 46-42 mode, and select the I-FAX or FAX.
2)
Select a mode to be adjusted with the scroll button.
3)
Press [EXECUTE] button.
The adjustment pattern is printed.
The adjustment pattern is printed.
4)
Check the print density of the adjustment pattern.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
If the print density of the adjustment pattern is unsatisfactory,
perform the following procedure.
5)
Enter the adjustment value with 10-key, and press [OK] button.
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
To select the exposure mode actually used in the FAX send
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button
When the adjustment value is increased, the image density is
increased. When the adjustment value is decreased, the
image density is decreased.
Repeat the procedures 3 thru 5 until a satisfactory result is
obtained.
To select the exposure mode actually used in the FAX send
mode, select item M and enter the set value corresponding to
the exposure mode with 10-key and press [EXECUTE] button
Display/Item
Content
Setting
range
Default
A AUTO
FAX auto exposure mode
send image density
(Normal mode)
send image density
(Normal mode)
1 - 99
50
B EXPOSURE1
FAX exposure level 1 send
image density
(Normal mode)
image density
(Normal mode)
1 - 99
50
C EXPOSURE2
FAX exposure level 2 send
image density
(Normal mode)
image density
(Normal mode)
1 - 99
50
D EXPOSURE3
FAX exposure level 3 send
image density
(Normal mode)
image density
(Normal mode)
1 - 99
50
E EXPOSURE4
FAX exposure level 4 send
image density
(Normal mode)
image density
(Normal mode)
1 - 99
50
F
EXPOSURE5
FAX exposure level 5 send
image density
(Normal mode)
image density
(Normal mode)
1 - 99
50
G EXECUTE
MODE
AUTO
1
1
(AUTO)
EXP1
2
EXP2
3
EXP3
4
EXP4
5
EXP5
6
Display/Item
Content
Setting
range
Default
A AUTO
FAX auto exposure mode
send image density
(Fine mode)
send image density
(Fine mode)
1 - 99
50
B EXPOSURE1
FAX exposure level 1 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
C EXPOSURE2
FAX exposure level 2 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
D EXPOSURE3
FAX exposure level 3 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
E EXPOSURE4
FAX exposure level 4 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
F EXPOSURE5
FAX exposure level 5 send
image density (Fine mode)
image density (Fine mode)
1 - 99
50
G AUTO
H_TONE
FAX auto exposure mode
send image density
(Half-tone/Fine mode)
send image density
(Half-tone/Fine mode)
1 - 99
50
H EXPOSURE1
H_TONE
FAX exposure level 1 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
I
EXPOSURE2
H_TONE
H_TONE
FAX exposure level 2 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
J
EXPOSURE3
H_TONE
H_TONE
FAX exposure level 3 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
K EXPOSURE4
H_TONE
FAX exposure level 4 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
L
EXPOSURE5
H_TONE
H_TONE
FAX exposure level 5 send
image density
(Half-tone/Fine mode)
image density
(Half-tone/Fine mode)
1 - 99
50
M EXECUTE
MODE
AUTO
1
1
(AUTO)
EXP1
2
EXP2
3
EXP3
4
EXP4
5
EXP5
6
AUTO H_TONE
7
EXP1 H_TONE
8
EXP2 H_TONE
9
EXP3 H_TONE
10
EXP4 H_TONE
11
EXP5 H_TONE
12
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man10) service manuals if exist.