Read Sharp MX-M850 (serv.man14) Service Manual online
MX-M1100 DSPF SECTION C – 17
5)
Remove the screw (a), and remove the fulcrum plate (b).
Remove the lower door (c).
Remove the lower door (c).
6)
Remove the E-ring (a), and remove the paper guide (b).
7)
Remove the screw (a) and the step screw (b), and remove the
paper guide (c).
paper guide (c).
8)
Remove the screw (a), and disconnect the connector (b), and
remove the DSPF paper pass sensor 7 (c).
* When installing the sensor, check to confirm that the sensor
remove the DSPF paper pass sensor 7 (c).
* When installing the sensor, check to confirm that the sensor
boss (d) is securely engaged and fix it with the screw.
9)
Remove the E-ring (a), the belt (b), the pulley (c), and the pin
(d). Remove the E-ring (e), and slide the bearing (f) and
remove the transport roller 3 unit (g).
(d). Remove the E-ring (e), and slide the bearing (f) and
remove the transport roller 3 unit (g).
10) Remove the bearing (a) and the E-ring (b) from the transport
roller 3 (c).
a
b
c
a
b
a
a
c
b
a
b
c
d
a
b
c
d
e
f
g
a
c
b
a
Click on the first or last page to see other MX-M850 (serv.man14) service manuals if exist.