Read Sharp MX-M654N / MX-M754N (serv.man4) Service Manual online
MX-M754N MX-M654N/M754N (MAIN UNIT) 1 – 1
MX-M754N
Service Manual
[1] MX-M654N/M754N (MAIN UNIT)
1. Unpacking
A. Pulling out the main unit
1) Remove the top case, the top cushion, the packing case.
B. Fixing tape and protection material removal
1) Remove the fixing tape and the protection material.
C. Included parts check
1) Check to confirm that all the parts are provided.
2. Installation
A. Machine height and tilt adjustments
1)
Put the height adjuster plate (Packed items No.1 x4) under the
adjuster bolt at the bottom of the machine. Turn the adjuster
bolt to adjust the height and the tilt of the machine.
adjuster bolt at the bottom of the machine. Turn the adjuster
bolt to adjust the height and the tilt of the machine.
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
NOTE: Lower the height of the MX-CF11 to the lowest position
before adjusts the level between the MX-CF11 and the
main body.Adjust the height of the top surface of main
body reference to the top surface of the MX-CF11.
main body.Adjust the height of the top surface of main
body reference to the top surface of the MX-CF11.
B. Label attachment (*Only for Europe)
1)
Attach the Power supply careful label to the back of cabinet
NOTE: choose a linguistic label according to the area.
No.
Name
Quantity
1
Height adjuster plate
4
1
Low
High
5
: ‘16/Apr
5
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.