Read Sharp MX-M654N / MX-M754N (serv.man4) Service Manual online
MX-M754N MX-M654N/M754N (MAIN UNIT) 1 – 8
J. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
tomer's request.
To customize the following items after completion of the destination
setup, change the set values.
setup, change the set values.
K. Image quality check
Be sure to check the following items related to image quality. For
details of the adjustment and checking procedures, refer to the “[5]
ADJUSTMENT” on the Service Manual.Check that the following
items are within specification. If not, carry out the adjustment.
details of the adjustment and checking procedures, refer to the “[5]
ADJUSTMENT” on the Service Manual.Check that the following
items are within specification. If not, carry out the adjustment.
NOTE: When installing the copier, be sure to carry out the copy
gray balance and the printer gray balance.
(1) Image loss, void area (see ADJ 9)
(2) Copy gray balance (11-A / Auto adjustment)
(2) Copy gray balance (11-A / Auto adjustment)
1) Enter the SIM 46-74 mode.
2) Press [EXECUTE] button.
2) Press [EXECUTE] button.
The high density process control is performed, and the copy
gray patch image (adjustment pattern) is printed out.
(A4/11" x 8.5" or A3/11" x 17" paper is automatically selected.)
gray patch image (adjustment pattern) is printed out.
(A4/11" x 8.5" or A3/11" x 17" paper is automatically selected.)
3)
Set the gray patch image (adjustment pattern) paper printed in
procedure 2) on the document table. Set the gray patch image
(adjustment pattern) printed in the procedure 2) on the docu-
ment table. Place the gray patch image so that the fine lines
are on the left side. At that time, place 5 sheets of white paper
on the printed gray patch image (adjustment pattern).
procedure 2) on the document table. Set the gray patch image
(adjustment pattern) printed in the procedure 2) on the docu-
ment table. Place the gray patch image so that the fine lines
are on the left side. At that time, place 5 sheets of white paper
on the printed gray patch image (adjustment pattern).
4)
Press [EXECUTE] button.
The copy density and gradation adjustment is performed auto-
matically, and the adjustment pattern is printed. If there is any
streak or unclear print on the printed check pattern, check the
print engine for any problems.
The copy density and gradation adjustment is performed auto-
matically, and the adjustment pattern is printed. If there is any
streak or unclear print on the printed check pattern, check the
print engine for any problems.
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
2
Paper size setting of the Tray1/LCC.
3
Used to set the auditor specification mode.
5
Used to set the number (1 or 2) of count of paper
(A3 or WLT or 8K) that passes.
1:1pc 2:2pcs
* Targets: Total counter, maintenance counter,
(A3 or WLT or 8K) that passes.
1:1pc 2:2pcs
* Targets: Total counter, maintenance counter,
developer counter.
18
Used to set YES/NO of the toner save mode (Only
in UK and Japan versions)
* Carry out the setting by the user's program
in UK and Japan versions)
* Carry out the setting by the user's program
except the UK version.
1:accept 2:inhibit
52
Used to set whether non-printed paper (insertion
paper, cover paper) is counted up or not.
1:YES 2:NO
paper, cover paper) is counted up or not.
1:YES 2:NO
Q
O P
N
M
L
K
J
I
H
G
F
E
D
C
B
A
High
density
density
Low
density
density
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.