Read Sharp MX-M623U / MX-M753U (serv.man7) Service Manual online
MX-M753N DRY HEATER INSTALLATION 24 – 1
MX-M753N
Service Manual
[24] DRY HEATER INSTALLATION
1. Dry heater switch and dehumidifying
heater relay PWB installation
1)
Cut off the slit cover with nippers, and install the dehumidifying
heater switch.
heater switch.
2)
Remove the rear cabinet.
3)
Install the supporter and install the dehumidifying heater relay
PWB.
PWB.
4)
Connect the ACWH harness and pass it through the wire sad-
dle.
dle.
2. Scanner dry heater installation
1)
Loosen the screw, and push down the metal fixture.
2)
Open the DSPF unit to put it straight up.
No.
Part name
Part code
Q’ty
1
Dehumidifying heater switch
QSW-C1030QCZZ
1
2
Supporter
LSUPP0118FCZZ
4
3
Dehumidifying heater relay PWB
CPWBF1569FCE1
1
4
ACWH harness
DHAI-4570FCP1
1
1
2
2
2
3
No.
Part name
Part code
Q’ty
1
Scanner dry heater (120V)
RHETP0163FCPZ
1
Scanner dry heater (230V)
RHETP0164FCPZ
2
Heater fixing plate
LPLTM6923FCZZ
1
3
Banding band
LBNDJ0013FCZ1
2
4
Screw (M3 x 4S tight)
XHBS730P04000
2
4
Click on the first or last page to see other MX-M623U / MX-M753U (serv.man7) service manuals if exist.