MX-M364N, MX-565N. NOTE - Handy Guides are NOT a substitute for Service Manuals and Parts Guides - Sharp Copying Equipment Handy Guide. Page 19

 

Coin Vend Interface 

 

SHARP

 

 

 

 

All MX series machines have a coin vend interface located on the PCU Main PWB. The vending device 
activates various signals to indicate paper sizes and operation.  
 
 

 

 

Connector Manufacture: 

 

 

) 

 

 

 

Connector Type 

 

 

 

PND series 

 

 

 

Connector Part Code (Wire Side) 

 

PNDP-16V-Z 

 

Before connecting a third party auditor, the device should confirm to the following:- 

 

1.  The auditor interface should be optically isolated from the copier. 

2.  The device should be Power Supply Unit independent. 

3.  The device power supply unit should be a plug top adapter, not internal. 

4.  The plug top adapter should have a reinforced insulation barrier. 

5.  The audit device MUST comply and display the relevant safety approval mark (C-Tick, CE  

or equivalent). 

 
To enable coin vend function, test simulation 26 –03 should be set as required:- 
 

Coin Vendor Mode 

Diagnostic 

Setting 

The specified 

quantity is 

completed. 

Remainder of money 

is left 

Insufficient money during copy job 

The specified 

quantity is 

completed. 

No money 

remaining 

Black/Colour 

(No money 

remaining) 

Colour 

(Remainder of 

money left) 

Operation 1 

Operation 2 

Operation 2 

Operation 1 

Operation 1 

Operation 1 

Operation 2 

Operation 1 

Operation 1 

Operation 3 

Operation 2 

Operation 3 

 
 

OPERATION 1   Wait for auto clear setting time  

 (Default 60sec – can be changed by the system setting) 

 

OPERATION 2   Auto clear is not made. 

 

OPERATION 3   Setting is immediately cleared. 

 
 
 
 
 

Cont’d