Read Sharp MX-M364N / MX-565N (serv.man5) Service Manual online
MX-M565N MX-KB11 N 17 – 2
4) Remove the clamp. Peel off the mylar and disconnect the con-
nector.
C. Keyboard unit attachment
1) Turn over the operation section cover.
2) Remove the front cabinet cover from the Keyboard unit and fix
the Keyboard front cabinet cover in the packed items (No.4).
When fixing the Keyboard front cabinet cover, use the screws
fixing the front cabinet cover with the Keyboard unit.
When fixing the Keyboard front cabinet cover, use the screws
fixing the front cabinet cover with the Keyboard unit.
3) Attach the keyboard unit and fix it with the fixing screw.
4)
Connect the keyboard interface harness and attach the opera-
tion section cover.
tion section cover.
Be sure to place the key interface harness between the opera-
tion section cover and the FFC. (Section A)
tion section cover and the FFC. (Section A)
D. Operation panel attachment
1)
Connect the connector to the operation panel unit , and fix the
harness with the clamp.
harness with the clamp.
When assembling, put the mylar on the flat cable and fix them
with the clamp.
with the clamp.
Fit the flat cable edges with sections A of the Mylar, and
remove slack in sections B of the flat cables.
remove slack in sections B of the flat cables.
2
1
2
2
2
1
A
"
"
!
Click on the first or last page to see other MX-M364N / MX-565N (serv.man5) service manuals if exist.