Read Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man112) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
No
.
Subject Description
10 OSA
related
When an OSA application operating in IIS (Internet Information Services) and
the transmitted data size reaches the maximum data size, the scanned data
from the OSA application causes the main unit to freeze. This glitch has been
corrected.
the transmitted data size reaches the maximum data size, the scanned data
from the OSA application causes the main unit to freeze. This glitch has been
corrected.
11 OSA
related
When connecting a keyboard, while in an OSA application, the frame display of
the focus would go out of alignment or remain on-screen. This glitch has been
corrected.
the focus would go out of alignment or remain on-screen. This glitch has been
corrected.
12 OSA
related
When typing into a text box from a connected USB keyboard in an OSA
application and power-saving mode was entered and then recovered from, the
text that was entered would not be displayed on the screen or the main unit
would freeze, in some cases. This glitch has been corrected.
application and power-saving mode was entered and then recovered from, the
text that was entered would not be displayed on the screen or the main unit
would freeze, in some cases. This glitch has been corrected.
13 OSA
related
In an OSA application, the job completion notice would not be output. This
glitch has been corrected.
glitch has been corrected.
14 UI-related
While tray automatic selection is set to disabled, if paper runs out during
printing and the replacement paper was set to the correct paper, a message
prompting that the paper selected is incorrect would be output. This glitch has
been corrected.
printing and the replacement paper was set to the correct paper, a message
prompting that the paper selected is incorrect would be output. This glitch has
been corrected.
15 UI-related
For Italian and French, there was one part of the operation panel that was
localized incorrectly. This error has been corrected.
localized incorrectly. This error has been corrected.
16
Main body control-
related
related
F6-00 may occur if the main body returns from power-on mode or 1W night
mode N hours and 5 minutes (N: 0, 1, 2, 3,...) after from power-off mode or 1W
night mode. This glitch has been corrected. If this trouble code occurs in
power-on mode, a power on/off request message is displayed on the LCD of
the main body. The symptom is recovered when the power is turned off/on. If
this trouble code occurs during FAX reception in 1W night mode, the symptom
is recovered when the destination FAX is recalled.
mode N hours and 5 minutes (N: 0, 1, 2, 3,...) after from power-off mode or 1W
night mode. This glitch has been corrected. If this trouble code occurs in
power-on mode, a power on/off request message is displayed on the LCD of
the main body. The symptom is recovered when the power is turned off/on. If
this trouble code occurs during FAX reception in 1W night mode, the symptom
is recovered when the destination FAX is recalled.
17 Copy
related
When the number of pages is specified in [Special Functions]
[Print Menu]
of Copy, the printed page's character size will vary depending on the number
of lines printed. This glitch has been corrected.
of lines printed. This glitch has been corrected.
18 Option
related
On the built-in keyboard model, if a keyboard type card reader is connected to
the read USB port and low-power mode is entered and then recovered from,
the Keyboard type card reader will not be recognized. This glitch has been
corrected.
the read USB port and low-power mode is entered and then recovered from,
the Keyboard type card reader will not be recognized. This glitch has been
corrected.
19 Other
When the network connection speed is slow, the remote operation panel will
become abnormally slow. The following has been performed to improve this
functionality.
1) The compression option for VNC protocol has been enabled.
2) When the next data transmission request is sent while a request is being
become abnormally slow. The following has been performed to improve this
functionality.
1) The compression option for VNC protocol has been enabled.
2) When the next data transmission request is sent while a request is being
processed, all but the final is destroyed and the drawing data is thinned.
20 Other
Of counter information displayed in the MFP main body, items that do not exist
in MIB information have been added to MIB information.
in MIB information have been added to MIB information.
21 Other
The change to 8.5 inch LCD is now supported.
Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man112) service manuals if exist.