Read Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man112) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] (Except for China)
No
.
Subject Description
1 OSA3.5
support
OSA3.5 is now supported.
2
Software switch-
related
related
The following settings have been added to the FAX software SW.
- SW66-1: When receiving from the internet FAX, the size is selectable.
- SW66-1: When receiving from the internet FAX, the size is selectable.
1: Complies with SW66-5
0: Complies with SW62-4, 5 (default)
0: Complies with SW62-4, 5 (default)
- SW66-5: When receiving from the internet FAX, B4 size is selectable.
1: Do no select B4
0: Select B4 (default)
0: Select B4 (default)
* When you want to print a received I-FAX to only B4, use the following
settings in FAX software SW.
SW66-1: [1]
SW66-5: [0]
SW66-1: [1]
SW66-5: [0]
When you want to switch conventional paper selection switch (through SW62-
4, 5) when printing a received I-Fax, use the following setting in FAX software
SW.
4, 5) when printing a received I-Fax, use the following setting in FAX software
SW.
SW66-1: [0]
Or,
SW66-1: [1]
SW66-5: [1]
SW66-5: [1]
3 Printer-related
Data after the EOI (End of Image) marker in JPEG data of the pasted image
may not be printed because a PCL-XL error occurs as incorrect data. This glitch
has been corrected so that data after the EOI marker is ignored.
may not be printed because a PCL-XL error occurs as incorrect data. This glitch
has been corrected so that data after the EOI marker is ignored.
4 Printer-related
When printing directly from USB and the insufficient memory error was
displayed, the Notice Page text was incorrect. This has been corrected.
[Before change]
displayed, the Notice Page text was incorrect. This has been corrected.
[Before change]
A field in the TIFF file is not supported. The print job has been cancelled.
[After change]
There is insufficient memory. Printing has been interrupted.
5 Printer-related
When printing documents with both horizontal and vertical data from the PCL5
in a non-Windows environment, the horizontal data would not be printed in the
correct direction. This glitch has been corrected.
in a non-Windows environment, the horizontal data would not be printed in the
correct direction. This glitch has been corrected.
6 Printer-related
When using a print macro of the PCL5, characters and images would not output
in the specified colour. This glitch has been corrected.
in the specified colour. This glitch has been corrected.
7 Printer-related
Regarding the USTATUS DEVICE command (server-side), there have been
cases where the MFP does not send the correct command and, as a result, the
same data would be re-printed. This glitch has been corrected.
cases where the MFP does not send the correct command and, as a result, the
same data would be re-printed. This glitch has been corrected.
8 Printer-related
If a page with a large amount of characters was printed through PCL5, the
print speed would become slower based on the number of characters printed.
This glitch has been corrected.
print speed would become slower based on the number of characters printed.
This glitch has been corrected.
9 OSA
related
Regarding OSA external authentication, when the server load is too high, an
authentication error occurs and the print job cannot be completed. This glitch
has been corrected.
authentication error occurs and the print job cannot be completed. This glitch
has been corrected.
Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man112) service manuals if exist.