MX-M350N, MX-M350U, MX-M450N, MX-M450U (serv.man19). Image Send - Sharp Copying Equipment User Guide / Operation Manual. Page 87

Rotation settings can be separately established for
different document sizes. To turn off a rotation
setting, touch the checkbox of the appropriate
setting to remove the checkmark.

This setting lets you select whether page numbers
are printed at the top of Internet-Fax pages by the
receiving machine. The normal setting is to have
page numbers printed.

To prevent the size of image files transmitted by the
Internet-Fax function from becoming too large, you
can set a size limit.
If the size of the image file created by scanning the
original exceeds the limit, the image file is
discarded. The limit can be set from 1 MB to 10 MB
in 1 MB increments. The initial setting is
UNLIMITED.
If this setting is changed, the setting of "Maximum
size of data attachments" of Scan settings will also
be changed (

).

If the setting "I-Fax reception report on/off setting"
is set, set the number of times to retry before an e-
mail indicating Internet-Fax communication error is
to be sent. The default setting is 2 times.

Use the 

 or 

 key to specify the number of

times and then touch the [OK] key.

The I-Fax reception settings allow you to adjust
certain parameters for receiving Internet-Faxes to
better suit your needs.
Settings that can be adjusted depend on the
peripheral devices installed.
The I-Fax receive settings are as follows:
●

●

●

●

●

●

●

●

When you receive an Internet-Fax that includes the
sender's name and number, the received image is
slightly larger than the standard size. This setting
lets you select whether to have the received image
automatically reduced before printing to fit the
standard size.
Normally automatic reduction is turned on.

This setting determines the interval at which the
machine checks automatically to see if the mail
(POP3) server has received new mail. After finding
a new e-mail, the machine loads the data and
prints it. The interval can be set from 0 minute to 8
hours in 1 minute increments. The default setting is
5 minutes.
If you set 0 minute, the machine does not check
automatically for new e-mails.

Touch the [HOUR] key and then set the hour by
touching the 

 and 

 keys. Set the minute in

the same way. When finished, touch the [OK] key.

SYSTEM SETTINGS

ROTATION SENDING SETTING

A4

B5

ORIGINAL

SET

SENDING

DIRECTION

OK

B5R

A5R

A4R

B5

A5

SYSTEM SETTINGS

2

NUMBER OF RESEND TIMES AT RECEPTION ERROR

SET THE NUMBER OF RESEND TIMES AT RECEIVING RECEPTION ERROR REPORT FROM
RECEIVER.  (0 - 15 TIMES)

NOTE
If you turn automatic reduction off, the overall printed
image may be larger than the original and in some
cases must be split onto two pages. However, the
printed image of the original itself will be the same
size as the original, and thus clearer.

NOTE
When the machine is turned on, the machine checks
any new e-mail in the mail (POP3) server.

SYSTEM SETTINGS

HOUR

MINUTE

05

0

RECEPTION CHECK INTERVAL SETTING

SET THE TIME INTERVAL BETWEEN AUTO CHECKS ON MAIL SERVER FOR NEW-ARRIVED
DATA  (0 - 8 hours)