Read Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) Service Manual online
MX-M350/M450 N/U SIMULATION 9 - 24
4) Press [START] key.
The list of the ON time of the sensors and the detectors of the
paper transport section is printed. When a paper jam or misfeed is
generated, the ON time of each sensor and detector is checked to
check if the operation of the sensor and the detector, paper feed,
and transport are normal or not.
paper transport section is printed. When a paper jam or misfeed is
generated, the ON time of each sensor and detector is checked to
check if the operation of the sensor and the detector, paper feed,
and transport are normal or not.
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = PAPER JAM, SPF JAM, TROUBLE
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = TRAY1, TRAY2, TRAY3/LCC1, TRAY4/LCC2, BPT,
ADU
0
TRAY SELECT AUTO
ONLY
ONLY
Auto only (No selection allowed)
1
PRINT START
Print execution
Print of the set data is executed.
Print of the set data is executed.
2
PRINT PATTERN
Print pattern
1. Paper transport time data
1. Paper transport time data
24
24-1
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the misfeed counter, the misfeed
history, the trouble counter, and the trouble history.
(The counters are cleared after completion of
maintenance.)
history, the trouble counter, and the trouble history.
(The counters are cleared after completion of
maintenance.)
Item
Counter
1
PAPER JAM
Number of paper jams
2
SPF JAM
Number of SPF jams
3
TROUBLE
Number of troubles
1
SIMULATION 23-80
DATA PRINT MODE. SELECT SETTING, AND PRESS START.
0. TRAY SELECT :AUTO ONLY
1. PRINT START
2. PRINT PATTERN:
1
1
SIMULATION 23-80
0
SIMULATION 23-80
DATA PRINT MODE. EXECUTING....
0. TRAY SELECT :
1
Select 1 and
press [START] key.
press [START] key.
Press [SYSTEM SETTINGS] key
or [START] key.
or [START] key.
Press [SYSTEM SETTINGS] key
or [START] key.
or [START] key.
Select 2 and press [START] key.
DATA PRINT MODE.
INPUT VALUE, AND PRESS START.
(PRINT PATTERN)
INPUT 1.
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-2
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the number of use (the number of
prints) of each paper feed section.
prints) of each paper feed section.
Section
Paper feed
Item
Counter
1
TRAY1
Tray 1 use quantity
2
TRAY2
Tray 2 use quantity
3
TRAY3/LCC1
Tray 3/LCC left tray use quantity
4
TRAY4/LCC2
Tray 4/LCC right tray use quantity
5
BPT
Manual feed tray use quantity
6
ADU
Duplex feed quantity
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
SIMULATION 24-1
JAM/ TROUBLE COUNTER DATA CLEAR. SELECT1-3, AND
PRESS START.
1. PAPER JAM
2. SPF JAM
3. TROUBLE
1
SIMULATION 24-1
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
1
SIMULATION 24-2
PAPER FEED COUNTER DATA CLEAR. SELECT1-6, AND PRESS
START.
1. TRAY1 2. TRAY2
3. TRAY3/LCC1 4. TRAY4/LCC2
5. BPT 6. ADU
SIMULATION 24-2
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) service manuals if exist.