MX-M350N, MX-M350U, MX-M450N, MX-M450U (serv.man10). Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 20

MX-M350/M450 N/U  SIMULATION  9 - 20

(10 lines, 80 digits = 800 characters)

The trouble history is displayed.

The trouble history is displayed sequentially from the latest one.
The max. 100 items can be stored. (The oldest one is deleted
sequentially. The trouble position can be identified by the data.)

(10 lines, 80 digits = 800 characters)

The ROM version of each section can be checked. When there is
any problem in the software, use this simulation to check the ROM
version of each section and revise the version if necessary.

When installing or servicing this machine, execute this simulation
to print and save various setting and adjustment data for next ser-
vicing. (For example, memory trouble, PWB replacement, etc.)

1) Enter 1 with 10-key.

2) Press [START] key.

The various setting and adjustment data are printed out. (The print
paper cannot be selected optionally.)

FPOD_N

Built-in finisher POD not-reaching jam

FPOD_S

Built-in finisher POD remaining jam

FES_N

Console finisher entry port sensor (FES) 
not-reaching jam

FES_S

Console finisher entry port sensor (FES) 
remaining jam

FFPS_N

Console finisher saddle not-reaching jam 
(Not reaching the folding sensor (FFPS).)

FFPS_S

Console finisher saddle remaining jam 
(The folding sensor (FFPS) does not turn 
off.)

FSTPL

Console finisher staple jam 
(The stapler does not complete clinching.)

FPNCH

Console finisher punch jam 
(The puncher does not complete punching.)

FDOP

Console finisher door open jam 
(During/after paper passing, the front door, 
joint, or upper cover is opened.)

PID_N

Mail box  PID not-reaching jam

PID_S

Mail box  PID remaining jam

MPPD1_N

Mail box  MPPD1 not-reaching jam

MPPD1_S

Mail box  MPPD1 remaining jam

MPPD2_N

Mail box  MPPD2 not-reaching jam

MPPD2_S

Mail box  MPPD2 remaining jam

MPPD3_N

Mail box  MPPD3 not-reaching jam

MPPD3_S

Mail box  MPPD3 remaining jam

MPPD4_N

Mail box  MPPD4 not-reaching jam

MPPD4_S

Mail box  MPPD4 remaining jam

MPPD5_N

Mail box  MPPD5 not-reaching jam

MPPD5_S

Mail box  MPPD5 remaining jam

22-4

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the trouble (self diag) history.

Trouble

Code

Description

SIMULATION 22-3

PAPER JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
···············

SIMULATION 22-4

TROUBLE HISTORY.
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
···············

22-5

Other

Used to check the ROM version of each unit 
(section).

Software

S/N

Engine section serial number

MFP

MFP controller

(LANGUAGE)

(Language version)

BOOT

MFP controller boot ROM

FAX

FAX controller

NIC

Network card

PCU

PCU controller

SCANNER

Scanner controller

FINISHER

Finisher controller

DESK

Desk/LCC controller

MAIL BIN

mail bin controller

PUNCH UNIT

Punch unit

22-6

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to output the list of the setting and 
adjustment data (simulations, FAX soft switch, 
counters).

Data

Adjust/Setting data

0

TRAY SELECT

TRAY SELECT auto only (Selection is 
not allowed.)

1

PRINT START

PRINT START

Select 1 and press [START] 
key.

Press [SYSTEM SETTINGS] key or 
[START] key.

SIMULATION 22-5

ROM VERSION DATA DISPLAY.

S/N:

 0000000000

MFP:  

 

1.00

(LANGUAGE:1.00)

PCU: 

         1.00           BOOT:         1.00

SCANNER:        1.00            FAX:         1.00

FINISHER:       1.00            NIC:         1.00

DESK:

         1.00       MAIL BIN:         1.00

PUNCH UNIT:     1.00

SIMULATION 22-6

DATA PRINT MODE. SELECT SETTING, AND PRESS START.

0. TRAY SELECT  :AUTO ONLY

1. PRINT START

1

SIMULATION 22-6

0

DATA PRINT MODE. EXECUTING···.

0. TRAY SELECT  :

1