Read Sharp MX-M310 / MX-M310N (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-TE10 (Paper exit tray) 6 - 1
[6] MX-TE10 (Paper exit tray)
1. Parts included
2. Installation
1) Remove two EPE cushions.
2) Remove five screws and remove the rear cabinet.
3) Insert the harness of the right paper exit unit to the hole of the
second paper exit.
Note: Wire the harness to the upper of the rib.
If wiring it to the under of the rib, the harness may come into
contact with the gear.
contact with the gear.
4) Insert the pawl of the right paper exit unit to the oval hole of the
frame of the main unit.
Insert the positioning boss of the main unit to the round hole in
lower side.
lower side.
5) When tightening the screw, tighten in the sequence of 1, 2, 3
and 4.
6) Wiring
Paper exit unit
Paper exit tray
Paper holding arm
Harness cover OP
Screw (M3 x 4)
Paper exit
right cover
Right paper
exit actuator
Screw (M4 x 10)
Screw (M3 x 8)
Rib
Gear
3
2
1
4
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man5) service manuals if exist.