Read Sharp MX-M310 / MX-M310N (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-FN13 (Finisher) 5 - 4
∗ When holding the finisher, hold the front frame side and the rear
frame side.
20) Insert the finisher along the connection plate rail from the left side
of the machine until it locks.
21) Press the finisher from the front to slide to the rear together with
the connection plate.
22) Fix the connection plate from the front with the M3 screws (3 posi-
tions) which are packed with the finisher.
23) Install the finisher connection cabinet from the left. (A hook pawl is
provided on the back. Be careful not to float.)
24) Install the finisher front cabinet lower with four screws. (First attach
the A screw.)
A: M3 round-head screw (1 position)
Use the screw which was removed from the FIN connection
unit.
unit.
B: M4 P tight screws (3 positions)
Use the screws which were removed from the paper exit tray of
the machine.
the machine.
25) Install the left cabinet to the original position. (M3 screws 3 posi-
tions, M4 screws 2 positions)
26) Install the finisher front cover from the left side by sliding, and fix
the center of the fulcrum point with the resin clip.
A
B
B
B
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man5) service manuals if exist.