Read Sharp MX-M266N / MX-M316N / MX-M356N Handy Guide online
INITIAL SETUP
SHARP
8
DEVELOPER SETUP & TONER INSTALLATION
Sim 25‐02 Auto Developer Adjustment.
Toner cartridge must be installed before execution.
PRODUCT OPTION ACTIVATION
Activation of Optional Product(s):‐
System Settings – Administrator Mode – Product Key.
FIRMWARE UPGRADE [ALL]
Sim 22‐05 Check Firmware version(s):‐
Upgrade to latest version.
INITIAL SETUP
Sim 26‐01 Job Separator Tray Installation:‐
Yes/No.
Sim 26‐06 Machine Destination.
Sim 26‐35 Set Multi Error Counter
Set to 1 (Multi Count).
Sim 26‐50 Long Size Print Support (up to 1200mm),
D: 0 = Disable, 1 = Enable
.
Sim 55‐03 Process Mixed Size Pages (orientation) when Printing in Duplex:‐
SSW 3‐6,
0 = Disable, 1 = Enable.
Sim 55‐03 Toner Remain Status Display: SSW 22‐5,
0 = Disable, 1 = Enable.
System Settings: Adjust Date/Time (Inc. Daylight Saving setting).
Network Settings – Print Port Settings: Disable WSD.
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:‐
Paper Size & Type Setting:‐
System Settings – Paper Tray Settings.
PRINT IMAGE POSITION & MAGNIFICATION
Sim 50‐28 SETUP/PRINT ADJ (Lead, Offset or All).
SPF ADJ (Side 1, Side 2 or All).
OC ADJ (MFT, CS1 & CS2).
MANUAL ADJUSTMENTS:‐
Sim 48‐01
Magnification Adjustment (OC & SPF).
Sim 50‐01 Lead/Rear Edge, Loss & Void Adjust.
Sim 50‐05 Printer Lead Edge & Void Adjust.
Sim 50‐10 Image Off Centre Adjustment.
Sim 50‐12 OC & SPF Original Off Centre Adjust.
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N service manuals if exist.