MX-M266N, MX-M316N, MX-M356N (serv.man4). NOTE Installation Manual for models with the V suffix. - Sharp Copying Equipment Service Manual (repair manual). Page 13

MX-M356NV  MX-M265UV/M315UV/M356UV/M266NV/M265NV/M265V/M316NV/M315NV/M315V/M356NV (MAIN UNIT)  2 – 3

5)

Remove the harness of developer cartridge from the developer
cover.

6)

Remove the developer cover from the developer cartridge.

7)

While rotating the MG roller in the arrow direction, supply the
developer into the developer tank evenly so as not to overflow. 

* Shake the developer bag enough before opening it.

8)

Check that two hooks of the developer cover is hooked on the
toner cartridge guide, and secure the toner cartridge guide to
the developing unit. Then, tighten up the screws of the devel-
oper cover.

* Check that the DV seal is free from the developer. If devel-
oper is attached to the DV seal, clean it.

* After supplying developer, do not tilt or shake the developer
cartridge.

* Check that the both ends of the DV seals are not put in the
developer cover. 

9)

Connect the harness of developer cartridge to the developer
cover.

10) Attach the developer cartridge to the main unit, and secure it

with the screw.

Note: After inserting the DV unit into the machine, be sure to
tighten the blue screw to fix it to the machine.

Hook