MX-M266N, MX-M316N, MX-M356N (serv.man3). NOTE Service Manual for models with the V suffix. - Sharp Copying Equipment Service Manual (repair manual). Page 4

MX-M356NV  NOTE FOR SERVICING - ii

* Place of direct sunlight.

Plastic  parts  and  ink  may  be  deformed,  discolored,  or  may
undergo qualitative change.
It may cause a breakdown or output quality problems.

* Place which is full of organic gases such as ammonium

The  organic  photo-conductor  (OPC)  drum  used  in  the  machine
may  undergo  qualitative  change  due  to  organic  gases  such  as
ammonium.
Installation  of  this  machine  near  a  diazo-type  copier  and  blue
print machine may result in poor quality output.

* Place of much dust

When dust or contaminants enters the machine, it may cause a
breakdown or poor quality output.

* Place near a wall

The machine will require ventilation.
If  ventilation  is  not  proper,  poor  output  or  machine  failure  may
result.

* Unstable or irregular surface

If  the  machine  is  dropped  or  tips  over,  it  may  cause  injury  or
machine malfunction.
Use an optional desk or an exclusive-use desk.
When using the optional desk, be sure to fix the adjuster and lock
the casters.

When  handling  the  PWB  and  the  electronic  parts,  be  sure  to
observe the following precautions in order to prevent against dam-
age by static electricity.
* When in transit or storing, put the parts in an anti-static bag or an

anti-static case and do not touch them with bare hands.

* When and after removing the parts from an anti-static bag (case),

use an earth band as shown below:
* Put an earth band to your arm, and connect it to the machine.

* When  repairing  or  replacing  an  electronic  part,  perform  the

procedure on an anti-static mat.

11-13/16" 
(30cm)

11-13/16" 
(30cm)

17-23/32" 
(45cm)