MX-M260, MX-M260N, MX-M260FG, MX-M260FP (serv.man11). Operation Manual. - Sharp Copying Equipment User Guide / Operation Manual. Page 120

SELECTED PAPER TRAY IS OUT 
OF SERVICE.

Contact your authorised service representative.

-

CHECK STAPLER POSITION OR 
STAPLE JAM.

Staples are jammed in the finisher or the staple case is not 
attached correctly.  Check the staple case. If the message still 
appears after removing the jammed staples, disable the stapler 
using  "DISABLING OF STAPLER" in the administrator settings 
(See "6. SYSTEM SETTINGS (ADMINISTRATOR)".), and contact 
your authorised service representative.

136

(CALL FOR SERVICE SOON.)

It will soon be time for regular maintenance. Contact your 
authorised service representative.

-

(MAINTENANCE REQUIRED.)

It is time for regular maintenance. Contact your authorised service 
representative.

-

CALL FOR SERVICE. 
CODE:

Turn off the power and then turn it back on. If this does not clear 
the message, write down the 2-digit main code and 2-digit 
sub-code and promptly contact your authorised service 
representative.

-

PLEASE CHECK THE ORIGINAL 
SIZE. JOB IS CANCELLED.

The original in the RSPF is longer than the size that was detected. 
Reinsert the original, make sure that the size indicated in the 
touch panel is the same as the actual size, and begin copying. You 
can also select mixed feeding to copy onto paper that matches 
each original size after all originals have been scanned. 

-

MX-M310.book  118 ページ  ２００９年８月７日　金曜日　午後１時１０分