Read Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man11) User Guide / Operation Manual online
112
SYSTEM SETTINGS (ADMINISTRATOR)
INTERFACE SETTINGS
The "INTERFACE SETTINGS" are used to monitor
and set limits for the data that is sent to the machine’s
USB port or network port. The settings consist of the
following programs:
and set limits for the data that is sent to the machine’s
USB port or network port. The settings consist of the
following programs:
● HEXADECIMAL DUMP MODE
● I/O TIMEOUT
● USB PORT EMULATION SWITCHING
● NETWORK PORT EMULATION SWITCHING
● PORT SWITCHING METHOD
● ENABLE USB PORT
● ENABLE NETWORK PORT
HEXADECIMAL DUMP MODE
(When the PRINTER EXPANSION KIT is installed)
This program is used to print out the print data from the
computer in hexadecimal and in the corresponding text
characters (based on ASCII code). This allows you to
check whether or not print data is being correctly sent
from the computer.
This program is initially disabled (factory default
setting).
computer in hexadecimal and in the corresponding text
characters (based on ASCII code). This allows you to
check whether or not print data is being correctly sent
from the computer.
This program is initially disabled (factory default
setting).
Example of output in hexadecimal dump mode (A4
portrait)
portrait)
I/O TIMEOUT
This program is used to set the amount of time until I/O
timeout when waiting for print data.
In the event that the set amount of time elapses
without the port receiving any print data, the I/O
timeout function temporarily breaks the port
connection and intiates automatic port selection or
makes the port begin waiting for the next set of print
data.
The factory default settings are as follows:
timeout when waiting for print data.
In the event that the set amount of time elapses
without the port receiving any print data, the I/O
timeout function temporarily breaks the port
connection and intiates automatic port selection or
makes the port begin waiting for the next set of print
data.
The factory default settings are as follows:
• 180 (sec.)
• When the PRINTER EXPANSION KIT is installed:
• When the PRINTER EXPANSION KIT is installed:
60 (sec.)
USB PORT EMULATION SWITCHING
(When the PRINTER EXPANSION KIT is installed)
This program is used to set the printer language when
the machine is connected using the USB port.
The factory default setting is "PCL*".
* When the PS3 expansion kit is installed, the setting is
the machine is connected using the USB port.
The factory default setting is "PCL*".
* When the PS3 expansion kit is installed, the setting is
"AUTO".
Unless printing errors occur frequently, it is
recommended that the setting be kept at "AUTO".
recommended that the setting be kept at "AUTO".
NETWORK PORT EMULATION
SWITCHING
SWITCHING
(When the PRINTER EXPANSION KIT is installed)
This program is used to set the printer language when
the machine is connected using the USB port. The
selections are the same as for "USB PORT
EMULATION SWITCHING".
The factory default setting is "AUTO".
the machine is connected using the USB port. The
selections are the same as for "USB PORT
EMULATION SWITCHING".
The factory default setting is "AUTO".
Unless printing errors occur frequently, it is
recommended that the setting be kept at "AUTO".
recommended that the setting be kept at "AUTO".
Selections
Description
AUTO
The printer language is
automatically changed to match
the data received from the
computer.
automatically changed to match
the data received from the
computer.
PostScript
(When the PS3
EXPANSION
KIT is installed)
(When the PS3
EXPANSION
KIT is installed)
The data received from the
computer is printed using
PostScript.
computer is printed using
PostScript.
PCL
The data received from the
computer is printed using PCL.
computer is printed using PCL.
MX-M310.book 112 ページ ２００９年８月７日 金曜日 午後１時１０分
Click on the first or last page to see other MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man11) service manuals if exist.