MX-M202D (serv.man4). Installation Manual Updated December 2013. - Sharp Copying Equipment Service Manual (repair manual). Page 7

MX-M232D  (MX-M232D/M202D/M182D/M182) 3 - 1

Do not install your the machine in areas that are:
•damp, humid, or very dusty
•exposed to direct sunlight
•poorly ventilated
•subject to extreme temperature or humidity changes, e.g., near an air 

conditioner or heater.

•Be sure to allow the required space around the machine for servicing 

and proper ventilation.

•Use an exclusive to dedicated power outlet. If the power plug of this 

machine is inserted into a power outlet commonly used with other 
illumination units, flickers of the lamp may be result. Use a power outlet 
which is not used commonly with any illumination units.

•Avoid complex wiring.

•To avoid danger, the power outlet must be grounded. If no grounding 

wire is connected and a leakage occurs, a fire or an electric shock may 
be result.

1) Remove all tapes and protective material.
•Remove all tapes, then open the document cover and remove the 

protective material of sheet shape

2) Remove the fixing screw.
•Use a coin to remove the fixing screw.
•The fixing screw is required when transporting the machine. Keep it in 

the tray. (Refer to the later description.)

1) Open the bypass tray, and open the side cover.
2) Open the front cover.
•Hold the both sides and pull down to open.

3) Loosen the screw and remove the developer cartridge.

4) Remove the developer tank from the developer cartridge.

5) While rotating the MG roller in the arrow direction, supply the 

developer into the developer tank evenly so as not to overflow.

*

Shake the developer bag enough before opening it.

MG roller