Read Sharp MX-M202D (serv.man4) Service Manual online
MX-M232D (ADJUSTMENT) 12 - 1
[12]ADJUSTMENTS
1.Simulations
A. Entering the simulation mode
Simulation is hereinafter described as SIM.
Perform the following procedure to enter the SIM mode.
"#" key
"#" key
Interrupt key
"C" key
Interrupt key
Main code
Start key
Sub code
Start key
B. Canceling the SIM mode
When the clear all key is pressed, the SIM mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.
*
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.
*
After canceling the SIM mode, be sure to turn OFF/ON the power
and check the operation.
and check the operation.
Note:If the machine is terminated by a jam error or paper empty during
copying in the adjustment by the SIM, recopying is required.
2.Copier adjustment
A.Mechanism section
Note:If a jam error or paper empty occurs during copying in the
adjustment by the simulation, the image data are not saved, and
therefore recopying is required.
therefore recopying is required.
(1) Image position adjustment
a. OC image lead edge position adjustment (SIM 50-1)
Note:In advance to this adjustment, the sub scanning magnification
ratio adjustment must be performed.
1) Set a scale on the OC table as shown below.
2) Make a copy.
3) Check the copy output. If necessary, perform the following
3) Check the copy output. If necessary, perform the following
adjustment procedures.
4) Execute SIM 50-01.
Select a desired mode with the arrow keys, enter the adjustment
value with 10-key, and press [OK] key.
value with 10-key, and press [OK] key.
When [START] key is pressed, a sheet is printed.
When [RETURN] key is pressed, the process returns to the mode
selection window.
selection window.
<Adjustment specification>
Adjustment
mode
SIM
Display
text array
Set
value
Spec
value
Set
range
OC image lead
edge position
edge position
SIM
50-1
50-1
RRC-A
R/0.1
Lead edge
void:
void:
1 - 4mm
Image loss:
3mm or
less
3mm or
less
1 - 99
Main cassette
print start
position
print start
position
TRAY1
H/0.1
2nd cassette
print start
position
print start
position
TRAY2
Multi bypass
tray print start
position
tray print start
position
MFT
Lead edge void
DEN-A
B/0.05
(Mode selection window 1)
Sim50-1 LEAD EDGE
1:TRAY1
2:TRAY2
3:MFT
1/2 [ 1- 99]
2:TRAY2
3:MFT
1/2 [ 1- 99]
50
50
50
50
50
(Mode selection window 2)
Sim50-1 LEAD EDGE
4:DEN-A
5:RRC-A
6:DEN-B
2/2 [ 1- 99]
5:RRC-A
6:DEN-B
2/2 [ 1- 99]
50
1
50
50
Ready to copy.
S
100%
A4
(Copy start window)
Copies in progress.
S
100%
A4
(Copy execution window)
Click on the first or last page to see other MX-M202D (serv.man4) service manuals if exist.