Read Sharp MX-M200D / MX-M200DK Handy Guide online
25
11
Copy exposure level adjustment, individual setting (Photo) 600dpi
18
Image contrast adjustment (300dpi)
19
Exposure mode setting
(Gamma table setting/AE operation mode setting/Photo image
process setting)
(Gamma table setting/AE operation mode setting/Photo image
process setting)
20
SPF/RSPF exposure correction *2
29
Image contrast adjustment (600dpi)
30
AE limit setting
46
31
Image sharpness adjustment
48
01
Main/sub scanning magnification ratio adjustment
05
SPF/RSPF mode sub scanning magnification ratio adjustment in
copying *2
copying *2
49
01
Flash ROM program writing mode
50
01
Image lead edge adjustment
06
Copy lead edge position adjustment (SPF/RSPF) *2
10
Paper off-center adjustment
12
Document off-center adjustment
18
Memory reverse position adjustment in duplex copy *1
19
Rear edge void adjustment in duplex copy *6
51
02
Resist amount adjustment
53
08
SPF/RSPF scanning position automatic adjustment *2
10
SPF/RSPF scanning position setting
61
02
Laser power correction ON/OFF
03
HSYNC output check
63 01
Shading
check
07
SPF/RSPF automatic correction *2
64 01
Self
print
65
10
Key reception time setting display/non-display setting
11
Info lamp setting
67
50
USB reception speed adjustment
Execution inhibit conditions
*1) Execution is inhibited when the duplex setup is OFF and other than RSPF is set.
*2) Execution is inhibited when OC.
*3) Execution is inhibited when SPF. (Not RSPF)
*4) Execution is inhibited when the job separator is not installed.
*5) Execution is inhibited when the model is not provided with the CRUM.
*6) Execution is inhibited when the duplex setup is OFF.
Click on the first or last page to see other MX-M200D / MX-M200DK service manuals if exist.