MX-M200D, MX-M200DK. Handy Guide (Updated September '10). - Sharp Copying Equipment Handy Guide. Page 22

 

 

 

22 

Test Simulations 

 

 

Perform the following procedure to enter the simulation mode. 
[#] key [*] key [C] key [*] key  
Main code [START] key Sub code [START] key 
 

 

When the clear all key is pressed, the simulation mode is cancelled. 
When the interruption key is pressed, the process is interrupted and the screen 
returns to the sub code entering display. 
 
*After cancelling the simulation mode, be sure to turn OFF/ON the power and check 
the operation. 
 
Note: If the machine is terminated by a jam error or paper empty during copying in 
the adjustment by the simulation, recopying is required. 
 
Note: The values in the simulation columns are not default values but sample values. 
 

 

 

Main 
code 

Sub 

code 

Contents 

01 

01 

Mirror scanning operation 

02 

Mirror home position sensor (MHPS) status display 

02 

01 

Single paper feeder (SPF)/Reversing single pass feeder(RSPF) 
aging *2 

02 

SPF/RSPF sensor status display *2 

03 

SPF/RSPF motor operation check *2 

08 

SPF/RSPF paper feed solenoid operation check *2 

09 

RSPF reverse solenoid operation check *2 *3 

11 

SPF/RSPF PS release solenoid operation check *2 

03 02 Shifter/job 

separator 

sensor status display 

03 

Shifter operation check 

04 

Job separator operation check *4 

11 

Shifter home position check 

05 

01 

Operation panel display check  

02 

Fusing lamp and cooling fan operation check  

03 

Copy lamp lighting check  

06 

01 

Paper feed/transport solenoid operation check 

02 

Resist roller solenoid (RRS) operation check 

10 

Main cassette pickup roller cleaning