Read Sharp MX-LCX6 (serv.man4) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
The mounting instruction of the paper feed weight plates
1. Fit the two paper feed weight plates with each other, then fasten them by a screw in
a screw hole.
2. Fit the combined paper feed weight plates on the back side of the paper feed base as
shown in picture below.
3. Secure the combined paper feed weight plates on the side of the paper feed base by
screws in the two screw holes.
4. Secure the combined paper feed weight plates by a screw from the front side of the
paper feed base through the screw hole added.