Read Sharp MX-GBX1 Service Manual online
44
6.2 PUNCHING
PATTERNS
The SmartPunch uses a variety of easily interchangeable die sets that allow you to punch documents
in line for several different binding styles. By selecting the appropriate die set, you can use your
SmartPunch to punch documents in any of the binding styles indicated.
in line for several different binding styles. By selecting the appropriate die set, you can use your
SmartPunch to punch documents in any of the binding styles indicated.
North America
3 hole
VeloBind 11 hole
WireBind (2 Types)
- 21 hole WireBind
- 32 hole WireBind
- 32 hole WireBind
ColorCoil 44 hole
ProClick 32 Hole
Plastic Comb 19 Hole
ProClick
Please note that each punching style listed above requires a separate die set for the SmartPunch. The
SmartPunch can hold up to four Die Sets within its cabinet (one in the operating slot and three in the
storage area.
SmartPunch can hold up to four Die Sets within its cabinet (one in the operating slot and three in the
storage area.
To purchase additional or separate Die Sets, contact your authorized reseller.
6.3 CHANGING THE INTERCHANGEABLE DIE SETS
Your SmartPunch offers the convenience of interchangeable die sets, allowing you to economically
punch documents for a wide variety of binding styles. Changing the machine's die sets is both quick and
easy, as the following instructions illustrate:
punch documents for a wide variety of binding styles. Changing the machine's die sets is both quick and
easy, as the following instructions illustrate:
Removing Die Sets from the Machine: The inter-changeable die set slot of the SmartPunch is
located on the right front side of the machine. If a die set is already installed in your SmartPunch, you
can easily remove the die set by following these instructions:
located on the right front side of the machine. If a die set is already installed in your SmartPunch, you
can easily remove the die set by following these instructions:
Step 1:
Stop the multi-function printer/copier.
Step 2:
Open the SmartPunch access door panel on the front of the machine.
Step 3:
Securely grasp the handle of the die set and pull firmly. This firm pull disengages the
Automatic Latching Mechanism and allows the die set to slide out.
Automatic Latching Mechanism and allows the die set to slide out.
Step 4:
Continue to pull the handle until the die set is fully removed, supporting it with both hands.
Step 5:
Properly store the removed die set in the die set storage area at the top of the SmartPunch
(keep away from dust, dirt, accidental falls from the edge of counters, etc.).
(keep away from dust, dirt, accidental falls from the edge of counters, etc.).
Step 6:
Select the desired die set for your new job and slide it into the die set slot. Push die set in
firmly until it latches.
firmly until it latches.
WARNING: POSSIBLE PINCH POINT HAZARD. WHEN INSTALLING DIE SETS IN YOUR
SMARTPUNCH, ALWAYS KEEP FINGERS AND OTHER BODY PARTS OUT OF THE
MACHINE’S DIE SET SLOT AND AWAY FROM ALL AREAS OF THE DIE SET, EXCEPT FOR
THE FINGER HOLE IN THE DIE SET. FAILURE TO FOLLOW THESE PRECAUTIONS MAY
RESULT IN INJURY.
SMARTPUNCH, ALWAYS KEEP FINGERS AND OTHER BODY PARTS OUT OF THE
MACHINE’S DIE SET SLOT AND AWAY FROM ALL AREAS OF THE DIE SET, EXCEPT FOR
THE FINGER HOLE IN THE DIE SET. FAILURE TO FOLLOW THESE PRECAUTIONS MAY
RESULT IN INJURY.
Step 7:
Close the Access Door Panel.
Step 8:
Proceed with your printing and punching job.
Click on the first or last page to see other MX-GBX1 service manuals if exist.