Read Sharp MX-FXX1 (serv.man2) Service Manual online
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 8
* A to I: The greater the adjustment value is, the greater the image
loss is. 1step=0.1mm
66
66-1
Purpose
: Setting
Function (Purpose) : Used to display the FAX-related soft SW on
the LCD to allow changing the soft SW
while checking with the LCD.
while checking with the LCD.
Section
: FAX
Item
: Setting
Operation/Procedure
1)
When the machine enters Simulation 66-01, the screen on the
right is displayed.
right is displayed.
2)
When [SW NO] is entered with 10-key, "6" is displayed in the
column of [SW NO].
* (In this example, "6" is entered.)
* (The range of value to be entered is 2 to 170.)
* When [C] key is pressed, the entered value of [SW NO] is
column of [SW NO].
* (In this example, "6" is entered.)
* (The range of value to be entered is 2 to 170.)
* When [C] key is pressed, the entered value of [SW NO] is
cleared.
3)
When [DATA] button is pressed, the data of soft SW No. 6 are
displayed.
* When [SW NO] button is pressed, the display returns to the
displayed.
* When [SW NO] button is pressed, the display returns to the
initial screen.
4)
The data of soft SW can be changed with 10-key.
* When 10-key corresponding to the bit is pressed, the bit
* When 10-key corresponding to the bit is pressed, the bit
data are displayed as follows:
[1]
[1]
→ [0]
[0]
→ [1]
* When [SW NO] button is pressed, the display returns to the
initial screen.
5)
When [EXECUTE] button is pressed, it is highlighted and the
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
66-2
Purpose
: Setting
Function (Purpose) : Used to enter a country code and set the
default value for the country code.
Section
: FAX
Item
: Setting
Operation/Procedure
1)
When the machine enters Simulation 66-02, the following
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
to the country code list screen.
* The country code shift screen is shown on the next page.
* The currently set country code is displayed in the column of
* The currently set country code is displayed in the column of
"PRESENT:".
2)
Enter the country code (8 digits) with 10-key([0]/[1]). The
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of “NEW:” is cleared.
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of “NEW:” is cleared.
3)
When [SET] button is pressed after entering the country code,
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
* When [C] key is pressed, the display returns to the initial set-
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
* When [C] key is pressed, the display returns to the initial set-
ting screen.
4)
When [EXECUTE] button is pressed, it is highlighted and
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
* When [NO] button is pressed, [EXECUTE] button returns to
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
* When [NO] button is pressed, [EXECUTE] button returns to
the normal display and [YES] and [NO] buttons become
inactive.
inactive.
5)
When [YES] button is pressed, it is highlighted and the soft SW
corresponding to the country code is initialized.
* During clearing the FAX-related soft SW, [EXECUTE] and
corresponding to the country code is initialized.
* During clearing the FAX-related soft SW, [EXECUTE] and
[YES] buttons are highlighted.
6)
After completion of initialization of the soft SW, [EXECUTE],
[YES], and [NO] buttons become inactive.
* When [CA] key is pressed after completion of initialization of
[YES], and [NO] buttons become inactive.
* When [CA] key is pressed after completion of initialization of
the soft SW, the whole machine is reset.
Operation/Procedure (Shifting to the country page)
* When [DEST CODE] button is pressed on the initial screen, the
display is shifted to the country code list screen.
Use [
Use [
↑] [↓] buttons to select the country select page.
When the table item is the top (last)item, [
↑] [↓] buttons gray out.
When [
↑] [↓] buttons gray out, they are disabled.
* Press [BACK] button to return to the entry screen.
<Country code list>
SCANNER
mode (FAX,
other than
COPY)
mode (FAX,
other than
COPY)
A
Image loss
setting OC
setting OC
LEAD_EDGE(OC)
OC lead edge image loss setting
0 to 100
0 (0mm)
B
FRONT_REAR(OC)
OC side image loss setting
0 to 100
0 (0mm)
C
TRAIL_EDGE(OC)
OC rear edge image loss setting
0 to 100
0 (0mm)
D
Image loss
setting SPF
SIDE1
setting SPF
SIDE1
LEAD_EDGE(SPF_SIDE1)
Front surface lead edge image loss setting
0 to 100
0 (0mm)
E
FRONT_REAR(SPF_SIDE1)
Front surface side image loss setting
0 to 100
0 (0mm)
F
TRAIL_EDGE(SPF_SIDE1)
Front surface rear edge image loss setting
0 to 100
0 (0mm)
G
Image loss
setting
SPFSIDE2
setting
SPFSIDE2
LEAD_EDGE(SPF_SIDE2)
Back surface lead edge image loss setting
0 to 100
0 (0mm)
H
FRONT_REAR(SPF_SIDE2)
Back surface side image loss setting
0 to 100
0 (0mm)
I
TRAIL_EDGE(SPF_SIDE2)
Back surface rear edge image loss setting
0 to 100
0 (0mm)
Item
Display item
Description
Set range
Default value
CLOSE
0
A:
SIMULATION
NO.50
㧙27
SCANNER/FAX-SEND ALL EDGE ADJUSTMENT VALUE
30
㨇 0㨪
100
㨉
OK
TEST
FAX
SCANNER
A
㧦
30
㧧 LEAD_EDGE(OC)
B
㧦
20
㧧 FRONT_REAR(OC)
C
㧦
20
㧧 TRAIL_EDGE(OC)
D
㧦
30
㧧 LEAD_EDGE(SPF_SIDE1)
SIMLATION NO.66-01
TEST
FAX SOFT SW. SETTING.
CLOSE
EXECUTE
SW No.
DATA
㧦
㧦
1 2 3 4 5 6 7 8
(SW No.2-170)
JAPAN
00000000
U.S.A.
10110101
AUSTRALIA
00001001
U.K.
10110100
FRANCE
00111101
GERMANY
00000100
SWEDEN
10100101
NEWZEALAND
01111110
CHINA
00100110
Click on the first or last page to see other MX-FXX1 (serv.man2) service manuals if exist.