Read Sharp MX-FXX1 (serv.man2) Service Manual online
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 3
46
46-39
Purpose
: Adjustment
Function (Purpose) : Used to execute the image send sharpness
adjustment. (Only when FAX is installed)
Section
: FAX
Item
: Image quality
Operation/Procedure
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* Press [C] key to clear the entered values.
* Press [C] key to clear the entered values.
3)
When [OK] button is pressed, the current entered value is
saved to EEPROM and RAM.
saved to EEPROM and RAM.
* When [
↑], [↓] button, [COLOR], or [BLACK] key is pressed, the
current set values are saved to EEPROM and RAM.
<Set range and default value of each setup>
46-40
Purpose
: Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment. (Collective adjustment of all the
modes). (Only when FAX is installed)
modes). (Only when FAX is installed)
Section
: MFP/FAX
Item
: Image quality
Operation/Procedure
1)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
2)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [OK] button, [COLOR], or [BLACK] key is pressed, the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [OK] button, [COLOR], or [BLACK] key is pressed, the
data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button is
pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
46-41
Purpose
: Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Normal). (Only when FAX is
installed)
installed)
Section
: MFP/FAX
Item
: Image quality
Operation/Procedure
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
If there is no item over [
played in the setting area.
If there is no item over [
↓], the display grays out and the opera-
tion is invalid.
* If there is any item over [
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
Item
Display
Content
Set
range
Default
value
A
200 x 100[DPI]
OFF
OFF
200 x 100[DPI] half tone
OFF
OFF
0 to 2
1
B
200 x 200[DPI]
OFF
OFF
200 x 200[DPI] half tone
OFF
OFF
0 to 2
1
C
200 x 200[DPI] ON 200 x 200[DPI] half tone
ON
0 to 2
1
D
200 x 400[DPI]
OFF
OFF
200 x 400[DPI] half tone
OFF
OFF
0 to 2
1
E
200 x 400[DPI] ON 200 x 400[DPI] half tone
ON
0 to 2
1
F
400 x 400[DPI]
OFF
OFF
400 x 400[DPI] half tone
OFF
OFF
0 to 2
1
G
400 x 400[DPI] ON 400 x 400[DPI] half tone
ON
0 to 2
1
H
600 x 600[DPI]
OFF
OFF
600 x 600[DPI] half tone
OFF
OFF
0 to 2
1
I
600 x 600[DPI] ON 600 x 600[DPI] half tone
ON
0 to 2
1
FAX OUTPUT
SIMULATION NO.22̆11
TEST
FAX COUNTER DISPLAY
CLOSE
00000000
㧦
SEND IMAGES_L2
00000000
㧦
FAX OUTPUT_L2
00000000
㧦
SEND TIME
00000000:00:00
㧦
FAX SEND
00000000
㧦
RECEIVED TIME
00000000:00:00
㧦
FAX RECEIVED
00000000
㧦
ACR SEND
㧦
SEND IMAGES
00000000
㧦
1/1
0
00000000
Item
Display item &
Detail of display
Content
Set
range
Default
value
A
EXPOSURELEVEL
(ALL)
(ALL)
Exposure data value
(Collective)
(Collective)
1 to 99
50
CLOSE
0
A:
A㧦 1
B㧦 1
C: 1
D: 1
㧧
㧧
200 100 DPI
OFF
㧧
200 200 DPI
OFF
㧧
200 200 DPI
ON
200 400 DPI
OFF
SIMULATION NO.46-39
IMAGE SEND SHARPNESS ADJUSTMENT
0
㨇
0 㨪 2 㨉
OK
TEST
0
A:
A㧦 50
㧧
EXPOSURE LEVEL(ALL)
SIMULATION NO.46-40
EXPOSURE ADJUSTMENT(FAX㧦ALL)
50
㨇
1㨪 99㨉
OK
TEST
EXECUTE
CLOSE
Click on the first or last page to see other MX-FXX1 (serv.man2) service manuals if exist.